Advanced Visibility's Glow technology was developed for one reason…improve safety!
Many of you have seen and likely played with phosphorescent or glow-in-the-dark materials as a kid. You were likely very disappointed as the glow intensity was hardly noticeable, only lasting a few minutes and often very expensive. Glow-in-the-dark has always been a novelty until now. Advanced Visibility's Glow materials has a intensity bright enough to solve low light dangers and identify hazards without the us electricity, batteries or wires.
Manufactured in the U.S. AV Glow is available as a sew-on or heat applied for garments and PSA for decals or tape is visible outdoors for hundreds of feet after being charged by a natural or artificial light source and durable enough to stand-up to normal laundry conditions and outdoor environments. Being visible is no longer a novelty but a necessity!
Mission critical battery systems are inherently unreliable and can fail at anytime without warning in as little as two weeks. BTECH's products measure, record and trend critical battery data and predict battery failures before they occur.
Servicing a variety of industries; Power Utility Industry, Industrial, Data Centers, Financial, Telecom, Petrol-chemical, Government and Military, customers who have embraced BTECH's technology have virtually eliminated the risk inherent in battery back up systems.
Creative Composites Group (CCG) supplies innovative Fiber Reinforced Polymer (FRP) composite products for major infrastructure markets including utilities. They offer FRP composite distribution poles ranging from Class 10 through 1, up to 80 feet in length, and FRP transmission poles from class 1 through H6, in various lengths. The poles are classified as ANSI O5.1 wood equivalent poles. CCG’s combined team of engineers and technicians have been developing lightweight, resilient and cost-effective FRP products for more than 50 years.
• Composites for Utility Infrastructure
EMSPEC’s origin dates back to 1947. We are now a pioneer in innovative switchgear solutions, and our reach extends globally with a strong presence from coast to coast in Canada and holding important market shares in the USA, China, Australia and many more global regions. EMSPEC manufactures high quality switching equipment, including a complete range of high and medium voltage disconnect switches such as the folding vertical break, vertical break, center break, double end break, side break, semi-pantograph, indoor and outdoor tilt switches, grounding switches, manual and motor operators and a complete range of accessories.
The Micatu Optical Solution Platform is an all optical, configurable and modular solution for condition monitoring of power distribution systems, power transformers and power generation equipment that can support four types of sensors; voltage, current, vibration and temperature each with a common connection module that connects to the M410 Modular Sensor Processor.
When configured for Medium Voltage Smart Grid Measurements, the GridView™ Rg235 Medium Voltage & Current Sensor System is a direct replacement for standard power transformers and current transformers as well as pole-top and “bird-on-the-wire” sensors. Each three-phase sensor system provides highly accurate and precise simultaneous 3-phase measurement of voltage and current from 4kV to 35kV.
Polywater and Hauff-Technik Gmbh &Co. KG have introduced a line of sealing systems to the U.S. market. Theproduct line of mechanical seals and structural entrances will benefit a broadrange of industry sectors.
These sealing systemsare designed for use in both new construction and existing infrastructureranging from data centers, waste water treatment facilities, substations,multi-storied office complexes, and other infrastructure construction projects.Polywater | Hauff-Technik seals are adaptable and built to accommodate futuredemand for electrical and communication cables. The entire line of Polywater |Hauff-Technik sealants will protect against water, gas and rodent migration.The seals harden communities’ critical underground systems as they face harsherstorms, more flooding, and greater variation in air temperature
Power Design Inc manufactures fiberglass 15KV, 25KV and 35KV sectionalizing cabinets, pad mounted switchgear, primary metering enclosures and fiberglass buildings. We provide quality fiberglass products to underground, electrical, water, wind energy, wastewater and related industries. Our customers include investor owned utilities, electrical co-ops, electrical distributors engineering firms, and contractors.
Richards has proudly served the utility industry since 1945, earning the respect of customers and competitors alike. To have remained successful after all these years, in a demanding and competitive industry, is no simple task. It takes a lot of hard work, starting with our CEO, who oversees operations everyday…and finishing with the individuals on the production lines, who carefully craft every Richards product. They all share one common focus: satisfying the needs of you, our customer. You want reliability — we manufacture top-quality products that exceed your expectations. You want flexibility — Richards designs, manufactures, and tests many non-standard and specialty products to meet our customers’ requirements. Most of all, you want a trusted partner and you can always rely on Richards to assist you with any problem or emergency in the field.
SAE takes on the tough cathodic protection, AC mitigation and grounding assignments and provides innovative, engineered solutions to protect infrastructure from corrosion, AC induction, lightning strikes and other electrical phenomenon, SAE manufactures a number of unique environmentally friendly, long life products, tailored specifically to corrosion, AC mitigation and grounding challenges.
SNC RESTORE-LITE temporary power restoration and Current Balancing Transformer (CBT) Stray Voltage Control provide utilities with the tools needed to favorably impact both operations and customer satisfaction.
SNC RESTORE-LITE™ temporary power restoration systems allow utilities to restore power to homes and businesses within minutes and then schedule permanent repairs during regular hours at a time convenient to both the utility and the customer.
SNC CBT Stray Voltage Control provides an electric power utility with a safe and effective tool for mitigating stray voltage and currents in a grounding system that can return 98% of the current on the neutral.
SATEC Inc. is a technology company that develops and manufacturers measurement instrumentation and software solutions for multiple industry and utility segments. Since 1987, SATEC Inc. has built a reputation of providing market driven, leading edge technology to multiple markets that separates us from competitors. SATEC has a unique reputation of being the "standard" people can rely on- whether it is basic measurements of Power, Energy and Loading, or the precise recording of Faults, Power Quality events or directional Harmonics.
From medium voltage switchgear and transformers to energy automation, Schneider Electrics delivers specific solutions for utilities, oil and gas, mining, data centers, and critical buildings, covering all power distribution needs for energy management.
TE Connectivity offers a wide range of reliable and cost-effective products for the electrical power industry. Our position as a leading supplier of electrical components enables us to design next-generation products for the harshest environments. For over 60 years, we have worked closely with our customers around the globe to develop innovative solutions to ever-changing challenges, known under product families such as AXICOM, ALR, AMP, Bowthorpe EMP, Crompton Instruments, Guro, Raychem, SIMEL and Utilux.
TE's Raychem, originally located in Menlo Park, California, was the first company to develop products using the new area of science called "radiation chemistry". The founder, electrical engineer Paul Cook discovered the process of cross-linking would allow the material to be heated, expanded and cooled, and then be reheated to its original size for superior insulation and protection. This resulted in the introduction of heat shrink tubing. A multitude of Raychem products were engineered and produced and have performed in the field for 30 years and counting.
Tech Products, Inc. is your global source for quality identification products to the utility and OEM market since 1948 including, Everlast pole tags, Fasttag Cable Markers, Tech-3D Embossed metal nameplates and transformer labels. We were the first to manufacture many of the products in use today but are most proud of our newest product, Everlast®. This is a unique system to mark your distribution and transmission system. The system has been tested by UL® to not fade for over 40 years. It has also been field tested since 1989. Using the Everlast® technology we have made signs that are being used on the Alaskan pipeline and on Tucson Electric power’s transmission towers. This product has continually proved it will not fade saving you a great deal of labor and cost by not having to replace signs tags and markers.
The Rope Guru team makes tools out of rope. They make Winch Lines for utility trucks, eye splices for transmission and distribution pulling lines, climbing lines, and rigging lines for tree climbers, tow ropes for marine, slings for heavy lift needs, and more. They also offer on-site inspections and virtual classrooms for the advanced learning of synthetic ropes, and how to inspect different types and applications for their use.
Founded in 1922 by Paul N. Travis, Travis Pattern and Foundry began as a small business producing patterns for sand casting. As the company grew, nonferrous foundry operations were added and industrial castings became a major part of the business.
The company experienced significant growth in the 1970's when it began producing a proprietary line of irrigation products. Self propelled irrigation systems were developed; then, as the product lines grew, casting operations increased and steel forming and galvanizing capabilities were added.
From the mid 1980's until the present, nonferrous casting operations have increased and more diverse product lines have been added. The acquisition of Product Design Unlimited in 1992 gave us the ability to provide a full range of substation connectors.
Currently residing on a 170,000 square foot campus, this fourth generation family owned company supplies an extensive range of products to a growing number of customers all over the world. Their facility has prevailed among the most modern anywhere. They continue to update our production equipment to keep up with new technology and provide the highest quality products available.
Founded in 1962, Trayer Engineering Corporation is a pioneer in the design and manufacture of low-maintenance vacuum switchgear for electrical distribution systems. Trayer proudly manufactures low-maintenance vacuum switchgear of the highest caliber, designed to thrive in the most challenging circumstances. Every submersible, padmount or vaultmount product is backed by over 55 years of leading innovation in design and manufacturing. Low maintenance designs increase system reliability and reduce operational costs year after year for the life of the product which makes Trayer Switchgear the best value solution in the industry. Built to last, Trayer stands alone in its commitment to excellence in design, quality workmanship, dependability and unparalleled customer service. Whether you are installing a SmartGrid or SCADA system, Automatic Transfer System, or just preparing for the future, Trayer provides the safest, longest lasting, field-proven, low-maintenance switchgear designs.
In 1992 Trystar began its journey as a welding cable supplier. This model was maintained until 1998 when Trystar started manufacturing own welding cable in-house. From there, Trystar started manufacturing portable power cable as well. With 20 employees and a solid cable business, Trystar then expanded the business and started manufacturing portable power distribution boxes.
Moving forward to today, Trystar is an industry leader. Trystar manufactures cable, portable and industrial power distribution equipment, automatic transfer switches, and generator docking stations. We are known for our high-quality products and make continuous improvements to our business, products, and facilities to best serve our customers.
Utility Solutions is a designer and manufacturer of hot line tools and products for the electrical power industry.
Engineers with broad electrical distribution experience founded the company in 1990 in order to design and manufacture safe and innovative products for lineman. Utility Solutions has created an environment that attracts highly skilled personnel with expertise in materials engineering, mechanical engineering, electrical engineering, machining, production, sales, and marketing.
Utility Solutions has the resources and experience to make new product ideas a reality. Their engineering department is the heart of the company and focuses on product design in both form and function. Their U.S. production facility, located in Western North Carolina, includes an extensive CNC machining department, molding capabilities, quality controlled assembly, and fiberglass production. Both their global sales force and our marketing department have proven track records of gaining market share with new and existing products.
Utility Solutions is a well positioned company in the utility market and has a growing list of patented tools and products. We are Lineman Driven. Field Proven.
Youngstown Glove Company, founded in 2002, builds high performance gloves for customers worldwide with a focus on quality, innovation and superior service. Today we offer over 40 glove styles that exceed the demanding needs of professional workers. Every Youngstown style that is developed goes through extensive testing - both in the laboratory and in the field - prior to making it to our customers. Our thorough testing, proven patterns, innovative materials and meticulous quality control methods ensure that Youngstown is truly #1 in Durability.