
Good splices depend on clean cable. After a solvent wipe, any excess has to come off without leaving lint or residue. SpliceMaster DT dry towels are Polywater's towels for wiping excess solvent from cables during splicing.
| Catalog # | Package | Wipe size | Per case |
|---|---|---|---|
| DT-69 | Box of 200 | 6 x 9 in. (152 x 229 mm) | 1 box |
| DT-1212 | Box of 100 | 12 x 12 in. (305 x 305 mm) | 1 box |
DT-69 is the smaller towel and a good fit for spot wiping. DT-1212 covers larger cable and heavier cleaning.
| Property | Statement |
|---|---|
| Material | Creped, highly absorbent, non-woven |
| Lint | Lint free, with no fiber-binding adhesives, so no residue |
| Strength | High tensile strength in both directions. Non-linting, non-tearing, non-snagging |
| Uses | Wiping solvent from cables during splicing, applying bulk Polywater cleaners, PE fusion work on gas and water piping, and other uses beyond cable cleaning |
| Product | Role |
|---|---|
| Polywater RP-1 Type RP cable cleaner | Fast-evaporating cable cleaner. Wipe the excess off with a drying towel |
| SpliceMaster non-conductive sanding cloth | Cable surface preparation before cleaning |
Polywater notes that good splices depend on using recommended materials and following proper procedures.
Polywater says they are lint free and contain no fiber-binding adhesives.
Size and count. DT-69 is 6 x 9 in. and 200 per box. DT-1212 is 12 x 12 in. and 100 per box.
Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.
Last updated: November 2026.