TE Raychem ESC end sealing caps are heat shrink caps that seal the end of a cable. Each cap is coated with a heat-activated sealant, fits easily over the cable end and shrinks in seconds into a robust environmental seal. TE lists them for use as a live end seal at 1000 volts, or as an end seal that keeps moisture and contamination out of a de-energized cable during storage and pulling. The caps are qualified to ANSI C119.1 and rated to the ICEA electrical withstand test for 1000 volts. Sizes and specs below are from the TE Connectivity North America Power Transmission and Distribution product catalog (2025).
Seven sizes cover cable from #12 AWG up to about 4.5 inches in diameter. Dimensions are in inches, with mm in parentheses.
| Catalog number | Primary insulation conductor size (AWG/kcmil) | 1000 V use range | General use range | Length | Standard pack |
|---|---|---|---|---|---|
| ESC-1/A | #12 to #8 | 0.17 to 0.35 (4 to 9) | 0.15 to 0.30 (4 to 8) | 1 | 50 |
| ESC-2/A | #6 to 3/0 | 0.31 to 0.71 (8 to 18) | 0.30 to 0.70 (8 to 18) | 2 | 50 |
| ESC-3/A | 4/0 to 750 | 0.65 to 1.25 (17 to 32) | 0.65 to 1.25 (17 to 32) | 3.5 | 40 |
| ESC-4/A | 750 to 1500 | 1.08 to 1.94 (27 to 49) | 1.05 to 1.95 (27 to 50) | 5.3 | 20 |
| ESC-5/A | 1500 to 2000 | 1.38 to 2.58 (35 to 66) | 1.30 to 2.65 (33 to 67) | 6.7 | 10 |
| ESC-6/A | Not listed | 1.94 to 3.54 (49 to 90) | 1.85 to 3.70 (47 to 94) | 5.6 | 10 |
| ESC-7/A | Not listed | 3.02 to 4.25 (77 to 108) | 2.95 to 4.50 (75 to 114) | 5.4 | 10 |
TE also offers bulk options. Contact Powertech Associates and we will check with TE.
What TE lists for the ESC cap.
| Topic | TE specification |
|---|---|
| Standards | Qualified to ANSI C119.1 and rated to the ICEA electrical withstand test for 1000 volts |
| Sealant | Coated with a heat-activated sealant |
| Installation | Fits easily over the cable end and shrinks in seconds to form a robust environmental seal |
| Cable protection | Reduces cable failure and scrap |
| Shelf life | Unlimited when stored in normal conditions |
| Test report | EDR-5161 |
TE gives three rules for choosing a cap.
| Step | What to do |
|---|---|
| 1. Measure the cable | Pick the catalog number from the conductor size or the use range, and confirm the choice against the dimensions in the table so the cap is sized correctly. |
| 2. Match the use | For a live end seal at 1000 volts, use the 1000 V use range column. For general sealing of a de-energized cable end, use the general use range. |
| 3. Count the conductors | Each energized conductor needs its own ESC cap. |
For medium voltage cable ends, see Raychem HVES Live End Seals.
It is a TE Raychem heat shrink cap coated with a heat-activated sealant that seals the end of a cable against moisture and contamination.
TE lists it as a live end seal at 1000 volts. The caps are rated to the ICEA electrical withstand test for 1000 volts. Use the 1000 V use range column to pick the size.
Yes. TE says each energized conductor requires a separate ESC sealing cap.
ESC-1/A through ESC-7/A. ESC-1/A is for #12 to #8 conductors, and ESC-7/A fits cable up to 4.25 inches in the 1000 V range.
50 each for ESC-1/A and ESC-2/A, 40 for ESC-3/A, 20 for ESC-4/A and 10 each for ESC-5/A, ESC-6/A and ESC-7/A.
TE lists an unlimited shelf life when stored in normal conditions.
Powertech Associates supplies TE Connectivity Raychem products. Order online: ESC-1/A, ESC-2/A, ESC-3/A, ESC-4/A, ESC-5/A, ESC-6/A or ESC-7/A. For bulk quantities or help matching a cap to your cable, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.
Last updated: November 2026.