Raychem HVSY Wye Tap Splices: HVSY-1522S, 1523S and PILC

May 28, 2026

Raychem HVSY Wye Tap Splices: HVSY-1522S, 1523S and PILC

Raychem HVSY heat shrink wye tap splices make a branch connection on 1/C poly-poly, PILC-PILC and PILC-poly cable up to 15 kV. They seal against water with a branch clip and TE's heavy-duty MBSM wraparound sleeve, and TE lists them as qualified to IEEE 404. The HVSY-1520S kits are for polymeric cable, and the HVSY-1580D kits are for wye splices where the main or tap cable may be paper insulated lead covered (PILC) or varnished cambric lead covered (VCLC).

Which HVSY do I need?

Pick by the main and tap conductor size and insulation diameter. The kits do not include connectors.

Catalog numberTE part #Conductor, AWG/kcmilInsulation diameter, mm (in)Pack
HVSY-1522S722789-0002 to 4/0 main and tap17 to 27 (0.65 to 1.05)1 kit per box
HVSY-1523S770433-000250 to 750 main, 2 to 750 tap24 to 37 main, 17 to 37 tap (0.95 to 1.45 main, 0.65 to 1.45 tap)1 kit per box

What are the key features and specs?

ItemTE says
Voltage classUp to 15 kV
Cable1/C poly-poly, PILC-PILC and PILC-poly
TechnologyHeat shrink tap splice with a clip closing
ShieldCopper tape, wire shield, lead sheath and UniShield cables
SealingInternal moisture seals for a redundant seal against water, plus a branch clip and the MBSM wraparound sleeve
ShapeCompact, which simplifies cable training
StandardIEEE 404
Where installedDirect buried, manholes and cable trays

How long is the installed splice?

All HVSY kits install to 30 in (750 mm) and need 45 in (1125 mm) of installation space, according to TE. The connector length limit depends on the kit.

KitMax connector length, in (mm)Installed length, in (mm)Installation space, in (mm)
HVSY-1522S3.0 (75)30 (750)45 (1125)
HVSY-1523S3.5 (90)30 (750)45 (1125)

Which connector goes with the HVSY?

The kits do not contain connectors. The first two rows are for soldered connectors. The rest are for Burndy YSH crimp connectors, which TE lists for copper conductors only. Insulation diameters are in mm (in).

KitConnectorMain conductorTap conductorMain insulationTap insulation
HVSY-1522SSoldered2 to 4/02 to 4/017 to 27 (0.65 to 1.05)17 to 27 (0.65 to 1.05)
HVSY-1523SSoldered250 to 7502 to 75024 to 37 (0.95 to 1.45)17 to 37 (0.65 to 1.45)
HVSY-1522SBurndy YSH-29292 to 4/02 to 4/017 to 27 (0.65 to 1.05)17 to 27 (0.65 to 1.05)
HVSY-1523SBurndy YSH-3434250 to 5004/0 to 50022 to 32 (0.85 to 1.25)22 to 32 (0.85 to 1.25)
HVSY-1523SBurndy YSH-3939500 to 750350 to 75028 to 37 (1.10 to 1.45)25 to 37 (1.00 to 1.45)

For HVSY-1520S kits on copper conductors only, TE says Burndy H-tap compressed connectors may be used in place of the half-duplex connector. For a 15 kV H configuration on 1/C shielded power cable, TE says to order the HVSH-1520 mod kit along with the right HVSY-1520S kit.

What is the HVSY-1580D for PILC cable?

The HVSY-1580D is TE's 15 kV wye splice for PILC and PILC-poly cable. It is for splices where the main or tap cable may be paper insulated lead covered cable or varnished cambric insulated lead covered cable.

KitConductor, AWG/kcmilInsulation diameter, mm (in)Max connector length, in (mm)Installed length, in (mm)Installation space, in (mm)
HVSY-1582D2 to 4/0 main and tap17 to 27 (0.65 to 1.05)3.0 (75)30 (750)45 (1125)
HVSY-1583D250 to 750 main, 2 to 750 tap24 to 37 main, 17 to 37 tap (0.95 to 1.45 main, 0.65 to 1.45 tap)3.5 (90)30 (750)45 (1125)

How do I order the right HVSY kit?

These notes are from TE's ordering information.

NoteTE says
Selection basisSelections are based on typical dimensions of 100% and 133% insulated cable and commonly used connectors made to AEIC standards
Nominal insulation thickness100%: 165 mils for PILC/VCLC and 175 mils for poly. 133%: 220 mils for poly
Other cable specsConfirm the selection with the cable and connector dimensions
FitCheck the poly cable insulation diameter to help ensure a proper fit
ConnectorsKits do not contain connectors. Contact TE for connector information
Package1 kit per box

Which TE test reports cover the HVSY?

Kit familyTE test reports
HVSY-1520SEDR-5236 and EDR-5256
HVSY-1580DEDR-5235

Frequently asked questions

What is a wye tap splice?

A splice that makes a branch connection from a main cable to a tap cable.

What voltage is the HVSY for?

Up to 15 kV.

Does the HVSY kit include connectors?

No. Order solder or Burndy YSH crimp connectors separately.

Which HVSY fits 4/0 cable?

The HVSY-1522S covers 2 to 4/0 main and tap.

Which HVSY fits 500 kcmil cable?

The HVSY-1523S covers 250 to 750 main and 2 to 750 tap.

Is the HVSY for PILC cable?

Yes. TE lists the HVSY series for PILC-PILC and PILC-poly cable. For a wye splice where the main or tap may be PILC or VCLC cable, use the HVSY-1580D series.

Can I use the HVSY for an H configuration?

For 15 kV H-configuration connections on 1/C shielded power cable, TE says to order the HVSH-1520 mod kit with the right HVSY-1520S kit.

Is installer training offered?

TE says the HVSY is not part of its standard installation training because the application is specific. TE offers specialized support through TE.com/trainingcenter.

Where can I buy Raychem HVSY wye tap splices in New England or New York?

Utility Power Supply Company (UPSC) and Powertech Associates supply TE Raychem products across New England and New York State. The HVSY-1522S and HVSY-1523S are in our online store. For the HVSY-1582D and HVSY-1583D PILC kits, connectors, the HVSH-1520 mod kit or anything else, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

For other heat shrink products, see the TE Raychem heat shrink tubing selection guide.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.