Richards Cable-to-Cable Limiters: CCLA, CCL, LS and ALS

January 14, 2026

Richards Cable-to-Cable Limiters: CCLA, CCL, LS and ALS

Richards makes cable-to-cable limiters for 125/216V underground secondary networks. A limiter combines a fuse and a connector in one body. It clears faults big enough to damage cable and ignores minor overloads. This guide covers the molded CCLA-IN assemblies, the CCLA assemblies, the CCL limiters themselves, and the LS sleeves and ALS filler shells you can order separately. Specs are from Richards' 2024 connector catalog. For splices and half duplex connectors, see our Richards splices guide.

Which limiter product do I need?

Start with whether you want the complete unit or the parts.

ProductWhat it isNotes
CCLA-INOne-piece molded assemblyFusible element, high-temperature filler shell and insulating sleeve in one unit. 500 and 750 to 500 sizes
CCLA and CCLAPComplete assembly, 4/0 to 750Element, shell and sleeve. CCLAP is for paper-insulated cable and has an oil-tight seal
CCL and CCLPThe limiter alone, 4/0 to 750Pure copper, tin-plated dipped. CCLP is for paper-insulated cable and has an oil-tight seal
LSTwo-piece EPDM insulating sleeveHolds the shell and cuts down on hand taping
ALSHigh-temperature filler shellArcing chamber for the element. For use with CCL, and already included in the CCLA

What are the CCLA-IN molded assemblies?

These one-piece molded units include the fusible element, filler shell and insulating sleeve, and Richards describes them as easy to install. Dimensions are in inches. Indents are the minimum number of crimps on each side, made with a nested indenter tool. For 125/216V applications only.

PartWire size# of indentsL (in)O.D. (in)
CCLA-IN-5005002132-1/8
CCLA-IN-750-500750 (side A), 500 (side B)313-1/42-1/8

What are the CCLA limiter assemblies?

These are complete units with a fusible element, a high-temperature filler shell and an insulating sleeve. The CCLAP versions are for paper-insulated cable and have an oil-tight seal. Dimensions are in inches. For 125/216V applications only.

Rubber insulationPaper insulationWire size# of indentsL (in)O.D. (in)
CCLA4/0CCLAP4/04/018-1/41-1/2
CCLA250CCLAP25025018-1/41-1/2
CCLA300CCLAP300300212-1/82-1/2
CCLA350CCLAP350350212-1/82-1/2
CCLA400CCLAP400400212-1/82-1/2
CCLA500CCLAP500500212-1/82-1/2
CCLA750CCLAP750750212-1/82-1/2

What are the CCL cable-to-cable limiters?

The CCL is made of pure copper and is tin-plated dipped for corrosion resistance. Richards says it is designed to clear faults great enough to cause cable damage while not clearing minor overloads. The CCLP versions are for paper-insulated cable and have an oil-tight seal. Dimensions are in inches. For 125/216V applications only.

Rubber insulationPaper insulationWire sizeO.D. (in)B (in)L (in)
CCL4/0CCLP4/04/011/161-3/46-3/8
CCL250CCLP2502503/41-7/86-3/8
CCL300CCLP30030013/1626-3/4
CCL350CCLP3503507/826-3/4
CCL400CCLP350 (as printed by Richards)40031/322-1/87
CCL500CCLP5005001-1/162-7/88-3/4
CCL750CCLP7507501-5/162-7/89

Richards prints CCLP350 in the paper-insulated column for the 400 size, which looks like a typo for CCLP400. Confirm with Richards before you order that size.

What are the LS sleeves and ALS filler shells?

The LS two-piece sleeves are molded from EPDM rubber and hold the high-temperature shell, which minimizes the need for hand taping. The ALS shells provide an arcing chamber for the limiter element under overload conditions. They are for use with the CCL series and are included in the CCLA assembly. Dimensions are in inches.

PartTypeCable size rangeO.D. (in)L (in)
LS-250Insulating sleeve4/0 to 2501-1/28-1/4
LS-2PC-500Insulating sleeve300 to 5002-1/212-1/8
LS-2PC-750Insulating sleeve7502-1/212-1/8
ALS250Filler shell4/0 to 2501-3/86-1/2
ALS500Filler shell300 to 5001-7/88
ALS750Filler shell7502-1/169

How do I pick the right limiter?

StepWhat to check
ApplicationRichards lists all of these for 125/216V applications only
Cable insulationRubber-insulated cable takes CCLA or CCL. Paper-insulated cable takes CCLAP or CCLP
Wire sizeMatch the tables above. The CCLA-IN covers 500 and 750 to 500
Complete unit or partsCCLA or CCLA-IN for a complete unit. CCL with LS and ALS if you build it up from parts
CrimpingMake the minimum number of indents on each side with a nested indenter tool

Frequently Asked Questions About Richards Cable Limiters

What voltage are these limiters for?

Richards lists the CCLA-IN, CCLA and CCL series for 125/216V applications only.

What is the difference between a CCL and a CCLA?

The CCL is the limiter itself. The CCLA is the complete assembly with the fusible element, a high-temperature filler shell and an insulating sleeve.

What does the P mean in CCLAP and CCLP?

Richards designs those versions for paper-insulated cable, with an oil-tight seal.

Can I order the sleeve or the shell on its own?

Yes. Richards lists the LS sleeves and the ALS filler shells as separate parts. The ALS is for use with the CCL series.

What is the CCLA-IN?

A one-piece molded assembly in two sizes, CCLA-IN-500 and CCLA-IN-750-500, that includes the element, shell and sleeve.

How many crimps does each side need?

Richards lists the minimum number of indents per side on the tables above, made with a nested indenter tool.

Where to Buy Richards Cable Limiters

Powertech Associates and Utility Power Supply Company represent Richards Manufacturing across New England and New York State. Order online: CCLA4/0, CCLA250, CCLA300, CCLA350, CCLA400, CCLA500 or CCLA750. For the CCLAP, CCL, CCLA-IN, LS and ALS parts, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.