Polywater CableFree Loosener: CF-35, CF-128 and CF-640

May 21, 2026

Polywater CableFree Loosener: CF-35, CF-128 and CF-640

Old cable that will not pull out is a common problem when you reuse a duct. Polywater CableFree Loosener is a cable removal aid that dissolves the residue holding the cable in place, so you can pull it without damaging the conduit.

What does CableFree Loosener do?

Polywater describes the loosener by what it does to the material binding the cable.

FunctionWhat Polywater says
DissolvesBreaks down wax-based lubricant, rust, soap, mud and other adhesive residues that bind cable in ducts
SoftensSoftens old wax or petroleum-based lubricants that have hardened over time
LoosensReleases cables stuck in conduit
LubricatesEases cable removal
SavesMinimizes damage and conduit reclamation costs
Opens spaceCreates room in the conduit or duct for new cable

Which CableFree size do I need?

CableFree comes in three sizes, from a squeeze bottle for a single run to a pail for larger jobs.

Catalog #ContainerUnits per case
CF-351 quart (0.95 L) squeeze bottle12
CF-1281 gallon (3.8 L) jug4
CF-6405 gallon (18.9 L) pail1

How much loosener do I need?

Polywater gives a rule of thumb of about 1 quart per 50 feet of 1 inch conduit (1 liter per 15 meters of 2.5 cm conduit). For larger conduit it gives this starting estimate.

UnitsFormulaWhere
ImperialQ = 0.02 x L x DQ in quarts, L is conduit length in feet, D is diameter in inches
MetricQ = 0.024 x L x DQ in liters, L is length in meters, D is diameter in centimeters

For example, 100 ft of 2 inch conduit works out to 0.02 x 100 x 2 = 4 quarts, which is one CF-128 jug. That example is our arithmetic from Polywater's formula.

How is CableFree applied?

Polywater lists two ways to get it into the duct.

MethodDetail
PourPour it into the duct
Compressed airDisperse it through the duct with compressed air

Polywater's flyer does not give a step-by-step procedure, and it does not list cable or conduit compatibility, cure time or temperature limits. Check the Safety Data Sheet before use and run your own evaluation on the cable and duct.

What NEC articles does Polywater cite?

ItemWhat Polywater says
Abandoned cable removalThe product meets NEC codes for removal of abandoned cable, citing Articles 800.2, 800.52(1) and 770.2

CableFree or a pulling lubricant?

They do different jobs. CableFree frees old cable, and a pulling lubricant helps you place new cable.

NeedProduct
Free a stuck or abandoned cableCableFree Loosener
Pull new cable once the duct is clearA Polywater pulling lubricant, covered in our cable pulling lubricants guide

Where can I buy Polywater CableFree in New England or New York?

Powertech Associates and Utility Power Supply Company represent American Polywater across New England and New York State. The CF-35, CF-128 and CF-640 are in our online store. For case quantities, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.