
TE's Raychem CRSM is a heat shrink wraparound sleeve. It is used to insulate, seal or rejacket 1000V power cables, and to repair the outer jacket on medium voltage power cables. TE also lists it for protection where installation space is tight or hard to reach. This guide covers all seven CRSM sizes, the ratings, and the lengths we stock. For the rest of the TE line, see the Raychem product guide.
The basics of what CRSM is and how it closes.
| Item | Detail |
|---|---|
| What it is | Heat shrink wraparound sleeve, cross-linked polyolefin, halogen-free and non-corrosive |
| Main uses | Insulating, sealing or rejacketing 1000V power cables; jacket repair on medium voltage power cables; protection where installation space is tight or hard to reach |
| Closure | Raised rail profile with a stainless steel channel, installed without special tools |
| Seal | Polyamide hot-melt adhesive for an environmental seal |
| Other features | UV stabilized, unlimited shelf life under normal storage conditions, RoHS and REACH compliant |
TE lists these applications for the product.
| Application | Use |
|---|---|
| Underground power networks | Insulating, sealing or rejacketing 1000V cables; jacket repair on medium voltage cables |
| Onshore and offshore wind energy | Same uses on the power cables in wind installations |
| Tight or hard-to-reach spaces | Wraparound design suits places where there is little room to work |
Match your cable's outside diameter to the application range. Dimensions are in mm with inches in parentheses. H and F are expanded minimums, and W is the minimum recovered wall thickness.
| Size | Application range (min to max) | H, expanded min | F, expanded min | W, recovered min |
|---|---|---|---|---|
| CRSM 34/10 | 11 to 27 (0.43 to 1.06) | 120 (4.72) | 12 (0.47) | 2 (0.08) |
| CRSM 53/13 | 17 to 43 (0.66 to 1.69) | 165 (6.49) | 25 (0.98) | 2 (0.08) |
| CRSM 84/20 | 24 to 68 (0.94 to 2.67) | 260 (10.23) | 34 (1.33) | 2 (0.08) |
| CRSM 107/29 | 32 to 86 (1.25 to 3.38) | 340 (13.38) | 34 (1.33) | 2 (0.08) |
| CRSM 143/36 | 39 to 115 (1.53 to 4.52) | 460 (18.11) | 34 (1.33) | 1.8 (0.07) |
| CRSM 198/55 | 60 to 160 (2.36 to 6.29) | 700 (27.55) | 34 (1.33) | 1.8 (0.07) |
| CRSM 250/98 | 105 to 200 (4.13 to 7.87) | 820 (32.28) | 34 (1.33) | 1.8 (0.07) |
The part number is the product family, the size and the length in mm.
| Step | What to do |
|---|---|
| 1. Measure | Measure the cable outside diameter |
| 2. Pick the size | Choose the size whose application range covers that diameter |
| 3. Pick the length | Add the length in mm to the size, for example CRSM 107/29-1000 |
These CRSM items are on our store. Each links to its product page.
| Size | Stocked lengths (mm) |
|---|---|
| CRSM 34/10 | 200, 1200 |
| CRSM 53/13 | 200, 1200 |
| CRSM 84/20 | 750, 1200 |
| CRSM 107/29 | 1000, 1200 |
| CRSM 143/36 | 1200 |
| CRSM 198/55 | 1200 |
| CRSM 250/98 | Not on the store. Contact Powertech Associates |
Material and application requirements from TE's data sheet.
| Property | Requirement |
|---|---|
| Operating temperature | -30°C to +85°C (-22°F to 185°F) |
| Shrink ratio | Greater than 3:1 |
| Longitudinal shrinkage | 10% max |
| Tensile strength | 14 MPa min |
| Ultimate elongation | 350% min |
| Hardness | 50 Shore D min |
| Dielectric strength | 12 kV/mm min |
| Volume resistivity | 1 x 10^12 Ohm cm min |
| Water absorption | 0.5% max after 14 days at 23°C |
| Low temperature flexibility | No cracking after 4 hours at -30°C |
| After aging, 7 days at 150°C | Tensile 12 MPa min, elongation 300% min |
| UV resistance | Carbon black 2.5% or more |
What the kit is made of and what it is qualified to.
| Item | Detail |
|---|---|
| Sleeve | Cross-linked polyolefin |
| Adhesive | Polyamide hot-melt |
| Closure | Stainless steel |
| Protective foil | Removable polyethylene |
| Standards | Qualified to ANSI C119.1 and EN 50393:2015; tested to IEC 60684-2 |
Quick answers to common questions.
| Question | Answer |
|---|---|
| What cables is CRSM for? | 1000V power cables for insulating, sealing or rejacketing, and medium voltage cables for jacket repair. |
| Does it need special tools to close? | No. The stainless steel channel closure installs without special tools. |
| What size do I order? | Match the cable outside diameter to the application range in the size table. |
| Is it halogen-free? | Yes, and it is UV stabilized. |
| How long does it keep in storage? | Unlimited shelf life under normal conditions. |
Order CRSM from our store, or contact us for sizes and lengths that are not listed.
| Option | How |
|---|---|
| Online | Search CRSM on the store |
| Other sizes and lengths | Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772 |
Last updated: November 2026.