TE Raychem Product Guide: Splices, Terminations, Heat Shrink and Wildlife Protection

October 8, 2026

TE Raychem Product Guide: Splices, Terminations, Heat Shrink and Wildlife Protection

TE Connectivity's Raychem line covers a lot of ground, from cable splices and terminations to heat shrink tubing and substation wildlife protection. This page sorts our Raychem guides by what you are trying to do, so you can get to the right size tables and selection advice quickly.

Start here: what are you trying to do?

Pick the job on the left and open the guide on the right.

If you need toStart with
Splice medium voltage cableRaychem Medium Voltage Splices: Cold Shrink vs Heat Shrink
Terminate medium voltage cable and know the voltage classRaychem MV Terminations by Voltage
Repair a jacket, seal a connection or insulate a busbar with tubingRaychem Heat Shrink Tubing: WCSM, MWTM, BBIT and BPTM
Match a WCSM size code to a cableRaychem WCSM Size Chart and WCSM vs. MWTM
Size a CRSM wraparound sleeveRaychem CRSM Wraparound Sleeve: Sizes, Ratings and Where It's Used
Keep squirrels, birds and other animals off substation equipmentTE Wildlife and Asset Protection Products: Which Raychem Product Protects What
Seal a duct around a cableRaychem RDSS Duct Sealing System
Pick a torch for heat shrink installationRaychem Torches and Accessories

Medium voltage splices and joints

These guides cover splicing shielded medium voltage cable and the parts for a splice job.

ProductWhat it isGuide
CSJA and the HVS familyCold shrink CSJA vs heat shrink HVS, HVS-T, HVSY and HVSA, with voltage classes, conductor and insulation ranges, connectors and grounding kitsMV splice selection guide
CSJAAll-in-one cold shrink joint for 5 to 8, 15, 28 and 35 kV shielded power cables, with a pre-expanded body, integrated neutral sock and no masticCSJA cold shrink in-line joint
MV splice job checklistOne checklist of the parts for a medium voltage cable splice job, from cable prep tools to the splice itself, with links to the detailed guide for eachMV cable splice job checklist

Medium voltage terminations

Start with the voltage guide if you are not sure which family fits, then open the product guide for sizes.

ProductWhat it isGuide
All termination families by voltageHVT, HVT-Z, CST, CSTOS and TFT sorted by 5/8, 15, 25/28 and 35 kV, with a six-step guide to picking a kitMV terminations by voltage
HVT and HVT-ZHeat shrink terminations for 5 to 35 kV shielded cableHVT and HVT-Z terminations
CSTCold shrink terminations for 5 to 35 kV polymeric cable, indoor CSTI vs outdoor CSTOCST cold shrink terminations
CSTOSOne-piece Class 1A cold shrink termination for polymeric cable up to 15 kVCSTOS sizing and part numbers
TFT-E and TFT-RCold applied elastomeric MV terminations, TFT-E for 15 to 35 kV and TFT-R for 5/8 to 35 kVTFT tool free terminations
HVESHeat shrink live end seals for 1/C PILC, VCLC and poly cable and 3/C PILC cable, 15 kV and 25 kVHVES live end seals

Low voltage kits, caps and boots

Low voltage splice kits, taps, end caps and breakout boots.

ProductWhat it isGuide
GILS and GelWrapGel splice kits and wraparound closures for low voltage cableGILS and GelWrap
GelPort GPRTSubmersible taps for URD distribution, rated 1000 VGelPort GPRT
ESCHeat shrink end sealing caps, ESC-1/A to ESC-7/AESC end sealing caps
CBRMedium wall heat shrink cable breakout boots for low voltage cables up to 1 kV, in 2, 3, 4 and 6 core sizesCBR breakout boots

Connectors and switches

Shear bolt connectors, AMPACT wedge connectors, taps and installation tools, and the in-line disconnect switch.

ProductWhat it isGuide
ASBS and ASBTShear bolt connectors and terminals for 1000 kcmil and smaller cableASBS and ASBT
ASBPRange taking shearbolt pin terminal connector for secondary distribution and overhead applications up to 35 kVASBP pin terminal connector
AMPACTTE's part selector app for finding the right wedge connector part numberAMPACT part numbers
AMPACT taps and stirrupsWedge pressure taps and stirrups, with the white, blue and yellow color code, tap families by conductor size, stirrup ratings, and the HTT, EL and BAT versionsAMPACT taps and stirrups
AMPACT installation toolsSmall and large tools, EZLoad, cartridges, take-off clips, hot-stick accessories, inhibitor and replacement parts by catalog numberAMPACT installation tools
In-line disconnect switchAMPACT ILD-II, installed with a hot stick, for the 15 kV to 69 kV classInstalling the in-line disconnect switch

Heat shrink tubing, tape and torches

Tubing, wraparound sleeve and tape for sealing, jacket repair and busbar insulation, plus the torches used to install them.

ProductWhat it isGuide
WCSM and MWTMHeavy-wall and medium-wall heat shrink tubing for sealing and jacket repairWCSM size chart and WCSM vs. MWTM
CRSMWraparound heat shrink sleeve, with sizes, ratings, ordering and the lengths we stockCRSM wraparound sleeve
BBIT and BPTMBusbar insulation tubing, BBIT heavy-wall for applications up to 36 kV and BPTM medium-wall up to 25 kVBBIT vs. BPTM
HVBTHeat shrink, adhesive-coated busbar insulation tape for retrofit workHVBT busbar insulation tape
Tubing overviewQuick-pick table across WCSM, MWTM, BBIT and BPTMHeat shrink tubing selection guide
TorchesFH-2618A-1, FH-2629 and FH-2649-PS torch kits, plus regulators, hoses, burners and bagsRaychem torches and accessories

Substation and overhead wildlife protection

Covers, guards and insulation for substations and overhead lines. Start with the overview if you are not sure which product fits.

ProductWhat it isGuide
Product overviewWhat BBIT, BPTM, HVBT, MVFT, MVCC, BCAC and BISG each protect, and where to startWhich Raychem product protects what
Bus and lead insulationHVIS sheet, HVBC kits, RRBB barrier board, MVCC covers, MVFT fusion tape and BCIC-Angle coverSubstation bus and lead insulation
BCAC and BCAC-ICBushing animal covers and inspection covers for 15 to 35 kV substation bushingsBCAC and BCAC-IC bushing covers
BISGBus insulator squirrel guards for substationsBISG squirrel guards
MVLC and BCICLine covers by conductor size and voltage class, plus overhead, recloser, 115 kV and flight diverter coversMVLC and BCIC overhead covers
WLG-60Wildlife Line Guard that installs without an outageWildlife Line Guard
Raptor coversProtection covers for bird-related outages on overhead linesRaptor protection covers
Material and outage backgroundHow wildlife bridging and guano flashover cause outages, and what TE says about V0+ materialWildlife outages and V0+ material

Duct sealing

Sealing ducts around cable.

ProductWhat it isGuide
RDSSInflatable duct seals, with sizing by duct and cable diameter, clips, installation and inflation toolsRDSS duct sealing system

Frequently asked questions

Where do I start if I am not sure which product I need?

Use the "Start here" table above. If you know the cable voltage and type, the terminations by voltage and splice selection guides are the fastest route to a size.

Do the guides list every size?

They follow TE's data sheets for each product. Sizes, catalog numbers and ratings should always be confirmed against TE's current documentation for the exact product.

How do I get help matching a part number?

Contact Powertech Associates with the cable size, voltage and application, and we will help you find the right Raychem part.

Where to buy TE Raychem products

Powertech Associates supplies TE Connectivity Raychem products to electric utilities, municipalities and contractors. To order, or to get help choosing a kit, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.