The Ripley 2x2 Plus and 4x4 Plus are hand-held end strippers for 600 V secondary cable. Each one holds interchangeable bushings in a hub, and the bushing sets how much insulation comes off. The 2x2 Plus holds two bushings and the 4x4 Plus holds four, so one tool covers more cable sizes without a bushing swap. Specs below are from the Ripley Power Utilities Catalog (2023-24).
The two tools share the same cutting design. The difference is how many bushings sit in the hub.
| Feature | 2x2 Plus | 4x4 Plus |
|---|---|---|
| Part number | 36101H | 36001H |
| Hub design | Double-sided hub that holds two bushings | Four-sided hub that holds four bushings |
| Dimensions | 5.75 in (146 mm) | 4.5 x 5 in (114 x 127 mm) |
| Weight | 8 oz (227 g) | 14 oz (397 g) |
| Bushing change | Hex wrench | Hex wrench |
Ripley lists these ranges for both tools.
| Topic | Ripley specification |
|---|---|
| Voltage | 600 V secondary cable |
| Conductor size | #6 AWG to 750 kcmil |
| Cable types | THHN/XHHW, SE and USE |
| Conductor construction | Concentric, compressed or compacted |
| Insulation thickness | 45 to 95 mils |
| Cold weather | Strips without damaging the conductor, even in cold climates |
| Safety | Guarded bushing cutting blades help prevent injury |
The tools are sold without bushings. Pick the bushing for your cable, and match it to the conductor size and insulation thickness. The store lists each size as an option on the bushing page.
| Bushing type | Diameter range | Part number |
|---|---|---|
| Square-cut | 0.18 to 1.20 in (4.6 to 30.5 mm) | Many sizes by cable and insulation thickness. Also fits the WS 68. |
| Chamfer-cut | 0.75 to 1.10 in (19.1 to 27.9 mm) | Many sizes by cable and insulation thickness |
For blades and spare parts across the Ripley line, see Ripley Bushings, Blades and Replacement Parts.
If the cable is bigger or you strip a lot of it, Ripley lists other options.
| Tool | Part number | Range | Notes |
|---|---|---|---|
| WS 22 | 12304H | #1/0 AWG to 1000 kcmil, 60 to 110 mils insulation | 6 in (152 mm), 1 lb (454 g). Two bushings, square-cut bushings from 0.350 to 1.450 in sold separately. |
| Ergonomic Kit | Contact factory | #8 AWG to 1000 kcmil | Power-driven kit with the WS 68 SNAP, WS 22A or both, in a hard plastic case. 4.5 lb (2.04 kg). |
| US21 THHN kit | US21-7200 | #1 to 400 kcmil THHN | Five variable bushings replace 20 or more fixed ones. See Ripley VariStrip Cable Strippers. |
For the full line, see Ripley UtilityTool Cable Strippers: Which Tool for Which Cable.
The 2x2 Plus holds two bushings and the 4x4 Plus holds four. Both strip 600 V secondary cable from #6 AWG to 750 kcmil.
No. Ripley sells the square-cut and chamfer-cut bushings separately.
THHN/XHHW, SE and USE, with insulation from 45 to 95 mils and concentric, compressed or compacted conductors.
With a hex wrench.
No. These tools are for 600 V secondary cable. See the Ripley strippers guide for medium voltage tools.
Ripley lists the 2x2 Plus and 4x4 Plus as end strippers.
Powertech Associates supplies Ripley UtilityTool products. Order online: 4x4 Plus, 2x2 Plus or WS 22. Order bushings here: square-cut or chamfer-cut. Not sure which size? Tell us your cable type and size and we will match it. Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772. Browse all Ripley tools in our store.
Last updated: November 2026.