TE AMPACT Taps and Stirrups: Color Codes, Families and How to Pick the Right Tap

November 4, 2026

TE AMPACT Taps and Stirrups: Color Codes, Families and How to Pick the Right Tap

AMPACT is TE Connectivity's wedge pressure tap system for aluminum overhead conductors. A C-shaped spring member and a wedge are driven together with a powder-actuated tool, and every tap is color coded so the tap, the cartridge and the tool match. This guide covers the taps themselves: the color code, the tap families by conductor size, the stirrups, and the high temperature, extra large and bolt-actuated versions. For the tools, cartridges and hot-stick accessories, see TE AMPACT Installation Tools. Specs are from the TE Connectivity North America Power Transmission and Distribution product catalog (2025).

How the AMPACT Tap System Works

TE calls the principle Wedge Pressure Technology. It was developed to overcome the limits of traditional compression and bolted connectors.

TopicTE specification
Constant forceMaintains a constant force in the connection for the life of the connector, and compensates for thermal expansion and creep
Contact surfacesMaximizes contact between the connector and the conductor, and overcomes oxidation of metallic surfaces
InhibitorThe "C" and wedge are factory coated with an inhibitor containing abrasive particles that help clean the contact surfaces during installation
Locking tabKeeps the wedge from loosening once it is driven. Every connection can be inspected by checking the wedge movement and the locking tab.
ConductorsSolid and stranded aluminum, aluminum alloy and stranded aluminum composite conductors, including AAC, AAAC, ACSR, ACAR, AW, ACSR/AW and ACSS. Also usable on copper in non-corrosive environments.
InstallationA fraction of the time of conventional crimp connectors, with no damage to the conductors when installing or removing the tap
ListingsUL listed (file E13288), RUS listed. Tested to ANSI C119.4 Class AA (electrical) and Class 3 (mechanical).

Tap Color Code: Tap, Cartridge and Tool

Tap packages and labels are color coded to match the right tool and cartridge. Each package is imprinted with the conductor combinations it fits.

Tap colorTap familyCartridgeTool
WhiteType II and Type II street light taps69338-5Small tool 69437
BlueMedium, 266.8 and 350 kcmil taps69338-1Small tool 69437
Yellow336.4 through 1192.5 kcmil taps69338-4Large tool 69611

Cartridge and tool numbers are from TE's tool pages. For the take-off clips that remove each tap, see our AMPACT tools guide.

AMPACT Tap Families by Conductor Size

Each family is a run of catalog numbers. The suffix picks the conductor combination, the first size is the run (large groove) conductor and the second is the tap (small groove) conductor. The through-wire column is the largest diameter that fits the large groove.

FamilyCatalog numbersWire combinationsThrough wire, max (large groove)Cartridge
Type II street light83653-11/0 with 10, 12 and 14Not listed69338-5
Type II602283, 602283-1 to 602283-81/0-2 down to 6-8 and 4-80.398 in (10.11 mm)69338-5
Medium600403, 600411, 600446, 600447, 600448, 600455, 600456, 600458, 600459, 600465, 6004661/0-1/0 up to 4/0-4/00.572 in (14.53 mm) on most sizes69338-1
266.8 kcmil602046-1 to 602046-7, 602046-9266.8-266.8 down to 266.8-40.650 in (16.51 mm)69338-1
350 kcmil602380 to 602380-7350-350 down to 350-60.684 in (17.37 mm)69338-1
336.4 kcmil602000 to 602007, 602013, 602014336.4-336.4 down to 336.4-60.750 in (19.05 mm)69338-4
477.0 and 556.5 kcmil602031-8, 602031-9, 1-602031-0, 1-602031-2 to 1-602031-9, 2-602031-0 to 2-602031-2477.0 and 556.5 with 2 up to 556.50.940 in (23.88 mm)69338-4
795 kcmil602121, 602121-1 to 602121-9, 1-602121-0 to 1-602121-4795-795 down to 795-61.156 in (29.36 mm)69338-4
1033.5 kcmil602180, 602180-1 to 602180-9, 1-602180-0 to 1-602180-61033.5-1033.5 down to 1033.5-61.250 in (31.75 mm)69338-4
1192.5 kcmil602300, 602300-1 to 602300-9, 1-602300-0 to 1-602300-71192.5-1192.5 down to 1192.5-61.375 in (34.93 mm)69338-4

The catalog lists every wire combination for each number, and a full diameter-limits table. Contact Powertech Associates with your two conductors and we will find the catalog number.

How to Pick a Tap

StepWhat to do
1. Know both conductorsIdentify the run conductor and the tap conductor by size, type and stranding.
2. Pick the familyFind the family by the larger conductor, such as the 795 kcmil family for a 795 kcmil run.
3. Check the groovesThe run wire must fit the large groove range, and the tap wire must fit the small groove range.
4. Check the sumThe sum of both wire diameters must fall inside the min and max sum of diameters for that catalog number. TE notes both conditions must be met.
5. Match the cartridge and toolUse the cartridge in the tap color, with the small tool for white and blue taps or the large tool for yellow.

TE also publishes a part selector app that cross references the stirrup, lug and cartridge for a tap. See TE Connectivity's One-Stop Shop for AMPACT Part Numbers.

Conductor Sizes the Taps Accept

TE lists the range of tap conductors each run conductor size can take.

Run conductor sizeTap conductor range
1192.5 kcmil1192.5 through 6
1033.51033.5 through 6
795795 through 6
556.5556.5 through 6
477477 through 6
397.5397.5 through 6
350350 through 6
336.4336.4 through 6
266.8266.8 through 6
4/0 AWG4/0 through 6
3/03/0 through 6
2/02/0 through 6
1/01/0 through 14
22 through 14
44 through 14
66 through 14

AMPACT Stirrups

A stirrup is a heavy-duty, tin-plated copper bail that lets a lineman hot-stick a clamp connection onto the line, where a jumper or hot line clamp attaches. TE says AMPACT stirrups connect almost all solid, stranded or compressed conductor combinations and meet ANSI C119.4 Class AA. They install with AMPACT tooling and cause no damage to the conductor when removed.

Fired-on stirrups

Catalog numberConductor range sizeACSR, AAC conductorStandard bailCartridgeAmperage
602585Type II#6No. 269338-5, white340
602586Type II#4, #2No. 269338-5, white340
1443312-1Medium#4, #2No. 269338-1, blue340
600464Medium1/0 or 2/0No. 269338-1, blue400
275436-1Medium1/0 or 2/01/069338-1, blue550
600468Medium2/0 or 3/0No. 269338-1, blue400
600469Medium3/0 or 4/0No. 269338-1, blue400
275435-1Medium3/0 or 4/01/069338-1, blue550
602173Medium3/0 or 4/02/069338-1, blue550
600463Medium266.8No. 269338-1, blue400
602201Medium266.81/069338-1, blue550
602502Medium350 AAC1/069338-1, blue550
276478-1Medium350 AACNo. 269338-1, blue400
600474Large336.41/069338-4, yellow550
602142Large336.42/069338-4, yellow700
602136Large336.44/069338-4, yellow700
602047Large397.5 or 4771/069338-4, yellow550
602143Large397.5 or 4772/069338-4, yellow700
602247Large397.5 or 4774/069338-4, yellow850
602104Large556.51/069338-4, yellow550
602248Large556.52/069338-4, yellow700
602115Large556.54/069338-4, yellow850
602174Large6362/069338-4, yellow700
602162Large7952/069338-4, yellow700
602163Large7954/069338-4, yellow850
602237Large1033.54/069338-4, yellow850

TE marks a few of these amperage ratings with a footnote that is not explained on the page. Check the catalog for those.

Bolt-actuated stirrups

These install with a bolt instead of a cartridge. Amperage is the current carrying capacity at 90 C, based on the largest current carrying conductor. TE says the bail alone is rated at twice that of copper of the same size, and notes that the 550 A ratings marked with two asterisks are de-rated by the limit of the tap run wire.

Part numberFamily sizeWedge IDConductor (AAC, ACSR)Bail sizeAmperage
2483833-1SmallG#6#2400
2483833-2SmallF#4, #2#2400
2483833-3SmallE1/0, 2/0#2400
2483833-4SmallD1/0, 2/01/0550
2483833-5SmallD3/0, 4/0#2400
2483833-6SmallC3/01/0550
2483833-7SmallC2/0, 3/02/0550**
2483833-8SmallB4/01/0550
2483833-9SmallB4/02/0550**
2413387-9MediumH266.8#2400
2413387-8MediumG266.81/0550
2413387-6MediumG336.4, 350#2400
2413387-5MediumF336.4, 3501/0550
2413387-4MediumF336.4, 3502/0700
2413387-3MediumD336.4, 397.54/0850
2413387-2MediumE397.51/0550
2413387-1MediumD397.52/0700
1-2413387-0MediumD477, 500, 556.51/0550
2413418-2LargeF7952/0700
2413418-1LargeE7954/0850

AMPACT HTT High Temperature Taps

AMPACT HTT taps are for ACSS overhead lines operating at up to 250 C. They use a newly developed contact-aid compound that seals the electrical contact area at high operating temperatures, and metal alloy particles that scrub the conductor as the wedge travels. TE says HTT exceeds the ANSI C119.4 Class AA current cycling test and meets the mechanical pull and corrosion requirements. HTT taps install with standard AMPACT tools.

FamilyCatalog numbersCartridge
336 kcmil2182370-169338-4, yellow
336, 477 and 556 kcmil1443516-1 to 1443516-669338-4, yellow
795 kcmil1443455-1 to 1443455-869338-4, yellow
1033.5 kcmil1443454-1 to 1443454-9, 1-1443454-069338-4, yellow
1033.5 kcmil (second series)2182371-1 to 2182371-9, 1-2182371-0, 1-2182371-169338-4, yellow
1272 kcmil2182332-1 to 2182332-569338-4, yellow
1590 kcmil2182520-1 to 2182520-9, 1-2182520-0 to 1-2182520-269338-4, yellow

The HT inhibitor can also be bought separately for any high temperature application: 1443316-2, AMPACT High Temperature Inhibitor, 1-pound can.

AMPACT EL Extra Large Taps

AMPACT EL connectors are for larger conductors on transmission lines. TE says they can be used in high voltage applications up to 230 kV, and that 500 kV lines will need a corona ring. They are used on solid and stranded aluminum, aluminum alloy and stranded aluminum composite conductors. TE notes that for hard drawn aluminum (HAL) taps you use the yellow cartridge 69338-4 and the large AMPACT tool 69611. Contact TE for additional sizes.

Catalog numberConnector description
1443208-12500 AAC to 2500 AAC
1443209-11351.5 ACSR (54/19) to 636 ACSR (26/7)
109423-11590 AAC (61) to 795 AAC (61)
276915-11590 ACSR (45/7) to 1590 ACSR (45/7)
81673-11590 ACSR (45/7) to 1272 ACSR (45/7)
81673-21590 ACSR (45/7) to 795 ACSR (45/7)
83086-11590 ACSR (45/7) to 336 ACSR (26/7)
83086-21590 ACSR (45/7) to 4/0 AAC (SOL)
109424-11351.5 ACSR (54/19) to 1351.5 ACSR (54/19)
109703-11351.5 ACSR (54/19) to 397.5 ACSR (18/1)
1443259-11351.5 ACSR (54/19) to 397.5 ACSR (18/1)
276548-11843.2 ACSR (72/7) to 795.5 ACSR (27/7)
602080, 602080-12500 AAC (X) to 500 AAC (19), 500 CU (19)
109433-11272 ACSR (45/7) to 954 ACSR (45/7)
276300-11272 ACSR (45/7), (36/1) to 1272 ACSR (45/7), (36/1)
1443268-11272 ACSR (54/19) to 1272 ACSR (54/19); 850 mm2 HAL to 660 mm2 HAL
81698-12167 ACSR (72/7) to 556.5 ACSR (24/7)

AMPACT BAT Bolt-Actuated Taps

The BAT replaces the powder-actuated installation with a bolt. TE says this makes it easier for linemen to install, while still providing the technical performance of the first generation of AMPACT connectors. It installs with a standard impact wrench, has a solid stop for visual inspection, and uses a removable insert to widen the application range. TE lists it for overhead power systems and electrical substations, with electrical performance to ANSI C119.4 Class AA and a short-time current test to AS1154.1. It is RUS listed.

SeriesCatalog numbersInsert
4/0 series2445483-1 to 2445483-7Not used
556 series2376750-1 to 2376750-6, 2376750-7 to 2376750-9, 1-2376750-0 to 1-2376750-2Removable on -1 to -6; sizes -7 and up do not use an insert
795 series2377042-1 to 2377042-7, 2377042-8, 2377042-9, 1-2377042-0Removable on -1 to -7; sizes -8 and up do not use an insert

Stud Disconnect System and Identifier Plates

The AMPACT stud disconnect adds a hot-stick disconnect to a tap. A two-hole NEMA lug is bolted to the disconnect and fastened to the line with an AMPACT tap, then the disconnect is plugged onto the stud. TE says it can be removed in seconds and that the system is tested to ANSI C119.4. Complete kits are 2182452-1 to 2182452-5 (MGV900 disconnect with a 1/2 in tinned copper stud) and 83470-3 and 83470-4 (MGV1200 disconnect with a 3/4 in stud). AMPACT identifier plates are angled for viewing from the ground and are flat black anodized aluminum. The alphanumeric characters are not supplied.

Identifier plateFits conductor
83005-4#2 to 1/0
83005-12/0 to 4/0 AWG
83005-54/0 to 266.8
83005-2336.4 to 556.5 AAC
83005-3795 AAC, ACSR

Frequently Asked Questions About AMPACT Taps

What does the AMPACT tap color mean?

It tells you which cartridge and tool to use. White and blue taps use the small tool 69437 and the white 69338-5 or blue 69338-1 cartridge. Yellow taps use the large tool 69611 and the 69338-4 cartridge.

Can AMPACT taps be used on copper?

TE lists them for aluminum and aluminum composite conductors, and says they may also be used on copper in non-corrosive environments.

How do I confirm a tap is installed correctly?

Check the wedge movement and the locking tab. TE says every connection can be visually inspected that way.

What is the difference between AMPACT, AMPACT HTT, EL and BAT?

HTT is for ACSS lines up to 250 C. EL is for extra large conductors on transmission lines up to 230 kV. BAT is installed with a bolt and an impact wrench instead of a powder-actuated tool.

Do AMPACT HTT taps need special tools?

No. TE says HTT taps install with standard AMPACT tools.

What is a stirrup for?

It gives you a bail to hot-stick a jumper or hot line clamp onto the line. AMPACT stirrups install with the same tooling as the taps.

Can I take an AMPACT tap off?

Yes, with the matching take-off clip. TE refers to Customer Manual 409-2106. See our AMPACT tools guide for the clips.

Where do I find the right catalog number?

Match the conductors in the family tables above, or use TE's part selector app. Contact Powertech Associates and we will match it for you.

Where to Buy AMPACT Taps and Stirrups

Powertech Associates supplies TE Connectivity AMPACT products. Send us your run and tap conductors, with the conductor type and stranding, and we will match the tap, stirrup, cartridge and tool. Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.