Birds, squirrels, tree limbs and flashovers cause a large share of overhead outages, and TE Raychem makes two product families to stop them: MVLC line covers for the conductor, and BCIC covers for insulators, reclosers, bus and dead ends. This guide lines up the MVLC sizes, ratings and installation tools, then the BCIC overhead covers by application. Part numbers and specs are from the TE Connectivity North America Power Transmission and Distribution product catalog (2025). For the older TE raptor cover announcement, see TE Raptor Protection Covers Prevent Bird Outages, and for the substation side of the range, see our TE wildlife and asset protection overview.
MVLC is a wrap-around cover for overhead conductors. TE says it prevents outages caused by incidental contact from tree branches or wildlife, and that it can be applied selectively on problem spans to avoid costly conductor replacement. It is installed on energized lines with the MVLC tool, which can be operated manually or automatically.
| Product size | Conductor size | Max. conductor diameter | Voltage class |
|---|---|---|---|
| MVLC-14-A/U-C(100) | #6 to 3/0 kcmil | 0.5 in (12.7 mm) | 15 kV |
| MVLC-14-A/241-C(100) | #6 to 3/0 kcmil | 0.5 in (12.7 mm) | 25 kV |
| MVLC-18-A/U-C(75) | #2 to 397 kcmil | 0.75 in (18 mm) | 15 kV |
| MVLC-18-A/241-C(75) | #2 to 397 kcmil | 0.75 in (18 mm) | 25 kV |
| MVLC-38R-A/U-C(50) | #2 to 1590 kcmil | 1.375 in (35 mm) | 15 kV |
| MVLC-38R-A/241-C(50) | #2 to 1590 kcmil | 1.375 in (35 mm) | 25 kV |
The A/U part numbers are the 15 kV covers and the A/241 part numbers are the 25 kV covers. The standard package for MVLC-14 is a 330 foot (100 m) continuous spool, and for MVLC-18 it is a 247 foot (75 m) spool. TE shows the cross section of each size:
| Size | Width | Height |
|---|---|---|
| MVLC-14 | 1.0 in across, 0.08 in across at the base | 1.0 in tall |
| MVLC-18 | 1.0 in across | 1.5 in tall |
| MVLC-38R | 1.65 in across | 2.4 in tall |
TE lists these test results for the sealed MVLC-A/U and MVLC-A/241 covers.
| Test | MVLC-A/U | MVLC-A/241 |
|---|---|---|
| AC withstand, dry, 1 minute | 15 kV min | 25 kV min |
| AC withstand, wet, 1 minute | 15 kV min | 25 kV min |
| AC long term withstand, dry, 4 hours | 8.6 kV min | 14.4 kV min |
| Property | Test method | Requirement |
|---|---|---|
| 30 day thermal loading (8 hr at 130 C, 16 hr off) | Thermal load cycle | No MVLC deformation |
| Conductor ampacity | Ampacity | 82 to 89% of bare conductor ampacity |
| Tensile strength | ASTM D638 | 8 MPa min (1150 psi min) |
| Ultimate elongation | ASTM D638 | 200% min |
| Abrasion resistance | 1000 cycles, 2068 g | 20% max thickness loss |
| Low temperature impact | ASTM D746 | No cracking at -20 C |
| Dielectric strength | ASTM D149 | 217 kV/cm at 1.27 mm (550 V/mil min at 0.050 in) |
| Tracking and erosion resistance | ASTM D2303 step voltage (initiate at 2.5 kV) | No tracking or erosion to top surface or flame failure after 200 minutes |
TE says MVLC can be installed at temperatures above 0 C (32 F). Related test reports are EDR-5308, EDR-5309, EDR-5316 and EDR-5478.
Each MVLC size has its own tool. The MVLC tool kit contains the installation tool, MVLC cutters, a drainage hole punch, a hand crank and a drive nut socket, packaged in a protective bag. Hand tools are also listed for each size.
| Catalog number | Use |
|---|---|
| MVLC-14-TOOL-100 | Installation tool for MVLC-14 |
| MVLC-18-TOOL-03-2006 | Installation tool for MVLC-18 |
| MVLC-38R-OHTOOL | Installation tool for MVLC-38R |
| MVLC-HAND-TOOL-14 | Hand tool for installing MVLC-14 |
| MVLC-HAND-TOOL-02 | Hand tool for installing MVLC-18 |
| MVLC-38R-HAND TOOL | Hand tool for installing MVLC-38R |
TE Raychem BCIC covers protect overhead insulators to prevent outages caused by birds. They use a rugged, non-tracking, UV-resistant polymer and are designed to nest over vibration dampers. These are the standard BCIC covers, supplied in gray (G) in the catalog.
| Catalog number | Application | Conductor range | Cover length (in) | Insulator type / ANSI | Pack |
|---|---|---|---|---|---|
| BCIC-G-DPIN-795-01 | Double pin insulator | #6 to 795 | 41 | 55-5, 55-6, 55-7, 56-1, 56-2, 56-3 | 6 |
| BCIC-G-DPIN-556-01 | Double pin insulator | #6 to 556 | 42 | 55-2, 55-3, 55-4, 55-5 | 6 |
| BCIC-G-DSMPIN-795-01 | Double pin insulator | #6 to 795 | 42 | 55-5, 55-6, 55-7, 56-1, 56-2, 56-3 | 6 |
| BCIC-G-HZ-795-XL | Horizontal post | #6 to 795 | 29 | Polymeric | 6 |
| BCIC-G-HZPOR/3.5D-795-01 | Horizontal post | #6 to 795 | 29 | Porcelain, over 35 kV | 6 |
| BCIC-G-HZPOR/4.5D-795-01 | Horizontal post | #6 to 795 | 29 | Porcelain, 25 to 35 kV | 6 |
| BCIC-G-DE/CL-01 | Dead end | #6 to 795 | 27 | Conductor | 6 |
| BCAC-G-DEADEND | Dead end | #6 to 795 | 26.6 | Porcelain or polymeric | 3 |
Related test reports: EDR-5562 and EDR-5369.
BCIC-GT covers do the same job with added features. TE says up to 10 feet of coverage on the conductor can be achieved when one cover and two arms are installed together, for conductor sizes #6 to 795. They install fast, and nest over vibration dampers.
| Catalog number | Application | Conductor range | Length (in) | Insulator type / ANSI | Pack |
|---|---|---|---|---|---|
| BCIC-GT-PIN | Porcelain pin, post | #6 to 795 | 20 | 55-4, 55-5, 57-2 | 6 |
| BCIC-GT-PIN/CT | Vise top | #6 to 795 | 20 | Vise top, Hendrix | 6 |
| BCIC-GT-PIN-XL | Porcelain pin | #6 to 795 | 21 | 56-1, 55-6, 55-7 | 6 |
| BCIC-GT-DPIN | Porcelain pin, post | #6 to 795 | 30.5 | 55-4, 55-5, 57-2 | 6 |
| BCIC-GT-HZ | Horizontal post | #6 to 795 | 21 | Polymeric | 6 |
| BCAC-G-ARM-01 | Extension arm | #6 to 795 | 31 | Not applicable | 12 |
Related test reports: EDR-5620 (salt fog and electrical evaluation) and EDR-5609 (raptor cover mechanical and electrical evaluation).
The recloser covers have a one piece hinged design for easy, quick installation, and can be installed on energized lines. TE says the cover can be re-entered for maintenance and then reused, and that it is rated for up to 35 kV. TE notes that other Raychem products can be purchased to insulate the leads and lightning arresters.
| Catalog number | Color | Height (A) | Max skirt (B) |
|---|---|---|---|
| BCIC-G-Reclosercover | Gray | 12.4 in (315 mm) | 7.8 in (198 mm) |
| BCIC-Reclosercover | Red | 12.4 in (315 mm) | 7.8 in (198 mm) |
| BCIC-G-Recloser-100 | Gray | 15.4 in (390 mm) | 6.75 in (171 mm) |
| BCIC-Recloser-100 | Red | 15.4 in (390 mm) | 6.75 in (171 mm) |
| BCIC-G-Recloser-200 | Gray | 14.5 in (368 mm) | 8.5 in (216 mm) |
| BCIC-G-Recloser-200S | Gray | 18.3 in (465 mm) | 8.3 in (211 mm) |
| BCIC-Recloser-200S | Red | 18.3 in (465 mm) | 8.3 in (211 mm) |
| BCIC-5D/8/11 | Red | 9.0 in (228 mm) | 4.8 in (122 mm) |
Pack quantities are in the catalog.
BCAC covers are for terminations, reclosers, lightning arresters and fuse cutouts. TE says extensive testing has shown the cover will not damage or deteriorate the terminations, that they can be installed on energized equipment, and that they are secured to the stud and the conductor to insure protection in high winds. The BCAC-G-CUTOUT is hot-stickable and clips onto cutout insulators between the first and second skirt.
| Catalog number | Hardware |
|---|---|
| BCAC-P-IC-5D/6 | Transformer bushing |
| BCAC-G-4D/13-2 | Terminations |
| BCAC-G-5D/8-01 | Transformer bushing |
| BCAC-G-AR-5D-2 | Ohio Brass arrester |
| BCAC-G-AR-4D-2 | TE arrester |
| BCAC-G-AR-3.75D-2 | Cooper arrester |
| BCAC-G-CUTOUT-100-01-B12 | Fuse cutout switch, 100 A, porcelain style |
| BCAC-G-CUTOUT-100-P2-B12 | 100 A, polymeric (Hubbell and Cooper style) |
| BCAC-G-CUTOUT-FT | Fuse cutout switch, 200 A, porcelain style |
| BCAC-G-CUTOUT-FT-P | Fuse cutout switch, 200 A, polymeric style |
Related test reports: EDR-5407 (bushing covers), EDR-5569 (BCAC-P-IC), EDR-5571 (BCAC-AR) and EDR-5573 (cutouts).
BCIC-115-PH is for 115 kV transmission lines. TE says it works on both porcelain disc and polymeric insulator designs, and its design lets the cover rest on the lowest insulator for porcelain i-string designs. It can be used on energized or de-energized installations.
| Catalog number | Length | Height | Insulator range | Application |
|---|---|---|---|---|
| BCIC-115-PH | 74 in (1879.6 mm) | 15 in (381 mm) | 9 to 12 in (229 to 305 mm) | Main cover |
| BCIC-Collar-50/280-5-B | Adapter collar for polymeric installations |
The BCIC-AFD-01 is designed to prevent bird collisions with power lines on distribution and transmission lines. It uses high reflectivity and glow-in-the-dark appliques, is hot-stickable and removable, and can be used on energized or de-energized installations.
| Catalog number | Description | Dimensions W x H | Conductor size | Pack |
|---|---|---|---|---|
| CU7208-000 | BCIC-AFD-01 | 4 x 3.5 in (102 x 89 mm) | #6 to 795 | 10 |
Related test report: EDR-5536, Rev. A.
The BCIC-Angle cover is a modular, wrap-around design for retrofit insulation on 3 to 4 inch angle busbars, when existing equipment cannot be dismantled. TE says it provides flashover protection up to 35 kV, is suitable for indoor and outdoor use, and that overlapping sections give increased busbar coverage. TE lists it with the substation covers, so we include it here for reference.
| Catalog number | Color | Busbar | Supplied length | Pack |
|---|---|---|---|---|
| BCIC-ANGLE-4X48 | Red | 3 to 4 in (75 to 100 mm) | 4 ft | 6 pieces |
| BCIC-G-ANGLE-4X48 | Gray | 3 to 4 in (75 to 100 mm) | 4 ft | 6 pieces |
Related test reports: EDR-5562, EDR-5369 and EDR-5594.
| Problem | TE product |
|---|---|
| Tree limbs or wildlife touching the conductor | MVLC line cover (14, 18 or 38R by conductor size) |
| Birds on pin, post or dead end insulators | BCIC covers or BCIC-GT covers |
| Animals on a recloser | BCIC recloser covers |
| Animals on bushings, arresters, terminations or cutouts | BCAC distribution covers |
| Flashovers on 115 kV lines | BCIC-115-PH |
| Bird collisions with the line | BCIC-AFD-01 flight diverter |
By conductor size. MVLC-14 fits #6 to 3/0 kcmil, MVLC-18 fits #2 to 397 kcmil and MVLC-38R fits #2 to 1590 kcmil.
The A/U covers are rated 15 kV and the A/241 covers are rated 25 kV.
Yes. TE says installation on energized lines is possible with the MVLC tool.
TE says MVLC can be installed at temperatures above 0 C (32 F).
TE lists conductor ampacity with the cover at 82 to 89% of bare conductor ampacity.
Both protect insulators from birds. TE says the GT covers can give up to 10 feet of coverage on the conductor when one cover and two arms are installed together.
Yes. TE lists dedicated BCIC recloser covers, rated up to 35 kV, that can be re-entered and reused.
Match the insulator type, ANSI class and conductor range in the tables above. Contact Powertech Associates and we will match it for you.
Powertech Associates supplies TE Connectivity Raychem wildlife and asset protection products. Send us your conductor size, insulator type and voltage class, and we will match the cover and the tool. Order online: BCIC-G-Recloser-100 recloser cover, BCAC-G-CUTOUT-100-P2-B12 fuse cutout cover or BCAC-P-IC-5D/6 bushing cover. For the MVLC covers and tools, the other BCIC covers and the rest, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.
Last updated: November 2026.