Polywater BOOM Wipes: Clean Bucket Trucks with B-1, B-D72

November 5, 2026

Polywater BOOM Wipes: Clean Bucket Trucks with B-1, B-D72

Insulated boom trucks pick up road debris, salt spray, hydraulic fluid, grease, pine pitch and creosote. Polywater says that residue makes water sheet instead of bead, which can cause a boom to fail dielectric testing. BOOM Prewash Wipes are Polywater's cleaner for fiberglass boom arms, buckets and the lower boom insulator. For hot sticks, see our guide to cleaning and maintaining hot sticks with Polywater S-1 wipes and W-1 wax.

What do BOOM wipes remove?

Polywater lists these contaminants.

ContaminantWhere it comes from
Grease, grime and tarRoad and work site
Creosote and pine pitchPoles and trees
Hydraulic fluidBoom and tool leaks
Salt, insects and road debrisTravel and weather

What is the difference between B-1 and B-D72?

The two catalog numbers differ in wipe size and package.

Catalog #PackageWipe sizeUnits per case
B-1One saturated wipe in a sealed pouch24 x 24 in. (71 x 71 cm)24
B-D7272-count canister10 x 12 in. (25 x 30 cm)6 canisters

Polywater lists BOOM wipes for overall or spot cleaning in the field and does not say which size to use for which job. B-1 is the large single wipe in a pouch, and B-D72 is a canister of smaller wipes. A case of B-D72 holds 432 wipes.

What does Polywater say about BOOM wipes?

FeatureStatement
Gel coatWill not remove or adversely affect the gel coat
ApprovalRecommended by boom truck manufacturers
FormatLarge pre-saturated wipes for overall or spot cleaning in the field
EnvironmentWater soluble, solvent free and biodegradable. Rinse with water

What should I avoid on a boom?

AvoidWhy, per Polywater
Common degreasers and solventsCan strip the gel coat
Acetone, xylene and tolueneCan cause permanent damage with prolonged contact and are flammable
Cleaners with abrasivesLeave residue
Abrasive padsScratch the boom and remove the gel coat

How do I clean and protect a boom?

Polywater's guidance is to clean, rinse, then wax.

StepWhat to do
1. CleanWipe the boom arms, bucket and lower boom insulator with BOOM wipes
2. RinseRinse with water
3. WaxProtect the fiberglass with Polywater wax so water beads. Order W-1 wax and buff wipes or the 16 oz bottle, W-16

Use only products approved by your aerial lift manufacturer. Follow the boom truck manufacturer's guidelines for dielectric testing frequency, cleaning practice and maintenance. Polywater cites ANSI A92.2-1990, Section 5.4.3, for testing intervals and field inspections.

Frequently asked questions

Can I use a degreaser on a bucket truck boom?

Polywater says common degreasers and solvents can strip the gel coat and recommends BOOM wipes for boom and bucket areas.

Do I wax after cleaning?

Polywater recommends it, to protect the gel coat and encourage water beading.

Which size do I need?

Polywater lists both for overall or spot cleaning. B-1 is a large 24 x 24 in. wipe in a pouch, and B-D72 is a canister of 10 x 12 in. wipes.

Where to buy Polywater BOOM wipes

Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772. More Polywater guides are in the Polywater product guide.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.