
Polywater makes products for cable pulling, sealing, cleaning and repair. This page sorts our Polywater guides by what you are trying to do, so you can get to the right selection advice and part numbers quickly.
Pick the job on the left and open the guide on the right.
| If you need to | Start with |
|---|---|
| Pull cable through conduit | Polywater Cable Pulling Lubricants: How to Choose J, PJ, LZ, NN and More |
| Plan a cable pull | Planning a Cable Pull with Polywater: Pull-Planner and the Lubricant Quantity Calculator |
| Seal a conduit or duct | Conduit and Duct Sealant Compared: Polywater ZipSeal, FST and AFT Foam |
| Clean and prep cable or splices | Polywater Cleaning Wipes: Type HP, Type RP and Grime-Away for Utility Crews |
| Stop a transformer oil or SF6 leak | Polywater PowerPatch Transformer Leak Repair |
| Repair a wood pole | Polywater UPR: Repair Utility Poles Instead of Replacing Them |
Lubricant selection, pumps and pull planning.
| Product | What it is | Guide |
|---|---|---|
| Cable pulling lubricants | Compares Lubricant J, PJ, LZ, NN, CLR and Dyna-Blue, explains winter grades and how much to use, and covers fiber optic and cable blowing lubes | Cable pulling lubricants |
| WJ and WNN | Winter grade lubricants rated for application down to -20°F | Winter grade lubricants |
| Jacket compatibility | How Polywater tests lubricant and cable jacket compatibility under IEEE 1210, and what to do for LSZH, CPE, CSPE and other specialty jackets | Lubricant and jacket compatibility |
| LP-D5 | Drill-powered, self-priming gear pump that moves lubricant from 5-gallon pails into conduit or onto cable | LP-D5 lubricant pump |
| Pull-Planner and calculator | Planning a pull for tension and sidewall pressure, then using the lubricant quantity calculator | Pull-Planner and lubricant calculator |
| Pull-Planner 4.0 | Software for designing conduit systems so pulling tension and sidewall bearing pressure limits are not exceeded | Pull-Planner 4.0 |
| Friction Table case study | Using Polywater's Friction Table to judge whether existing conduit can be reused for an upgrade | Evaluating a historic conduit |
Foam sealants, pad sealant and conduit adhesive.
| Product | What it is | Guide |
|---|---|---|
| ZipSeal, FST and AFT | Compared by size, water head, temperature, fire listings and setup, with catalog numbers and a ZipSeal quantity guide | ZipSeal vs FST vs AFT |
| AFT vs FST | AFT is a spray foam for low pressure conduit seals, FST is a cartridge foam rated for 22 feet of water head | AFT vs FST |
| FST-250 and FST-MINI | Catalog numbers with kit and case quantities, nozzles and tools | FST catalog numbers |
| InstaGrout | Pour-in foam that seals the openings under pad-mounted equipment against rodents and water | InstaGrout pad sealant |
| Wall, sleeve and conduit seals | Choosing the right seal for wall entrances, sleeves and conduits to keep water from causing outages | Stop water-caused outages |
| BonDuit | Two-part adhesive for watertight and airtight joints between HDPE conduit and PVC, fiberglass or steel | BonDuit conduit adhesive |
Cleaners, gel removers and prep supplies for splicing and telecom work.
| Product | What it is | Guide |
|---|---|---|
| Type HP, Type RP and Grime-Away | Compared by flash point, evaporation, dielectric strength, packaging and part numbers | Cleaning wipes |
| HydraSol | Cable gel remover, with container sizes from wipes to a 5 gal pail and part numbers | HydraSol gel remover |
| SP-ROLL | 1 in. x 50 yd roll of 120 grit, non-conductive sanding cloth for prepping MV and HV cable before splicing | SP-ROLL sanding cloth |
| MV Cable Clean & Seal Kit | Cleaning and sealing supplies for medium voltage cable in one job-ready box, powered by Polywater | Clean & Seal Kit |
| Communication cleaners | SqueekyKleen, AquaKleen, Type FO and FiberKleen for fiber optic, coaxial and copper telecom work | Communication cleaners |
Repair products and sprays for equipment and poles.
| Product | What it is | Guide |
|---|---|---|
| PowerPatch | Two-part epoxy sealant that stops oil and SF6 gas leaks on transformers, GIS and PILC cable, often without taking equipment out of service | PowerPatch |
| UPR | Two-part foam that repairs woodpecker holes, cracks and hardware holes in wood poles | UPR pole repair |
| P7-12 | Type P7 penetrating oil for moisture displacement, rust protection and lubrication | P7-12 penetrating oil |
| CG-13 | Type CG cold galvanizing spray, 90% zinc, with coverage, dry times and application steps | CG-13 cold galvanizing spray |
Polywater products for solar contractors.
| Product | What it is | Guide |
|---|---|---|
| Solar contractor products | InstaGrout, FST and AFT foam, Type HP cleaner, LZ lubricant and SPW panel cleaner, and what each one does | Products for solar contractors |
| SPW | Concentrated, water-based cleaner that removes dust, pollen and bird droppings from PV panels | SPW solar panel cleaner |
Quick answers about using these guides.
| Question | Answer |
|---|---|
| Where do I start if I am not sure which product I need? | Use the "Start here" table above. For pulling cable, begin with the cable pulling lubricants guide. For sealing, begin with ZipSeal vs FST vs AFT. |
| Do the guides list every product and size? | They follow Polywater's published documents for each product. Confirm sizes and part numbers against Polywater's current documentation for the exact product. |
| How do I get help matching a part number? | Contact Powertech Associates with the application and quantity, and we will help you find the right Polywater product. |
Order Polywater products from our store, or contact us for products that are not listed.
| Option | How |
|---|---|
| Online | Search Polywater on the store |
| Help choosing a product | Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772 |
Last updated: November 2026.