Raychem MVFT Fusion Tape: Ratings, Rolls and How Much to Use

June 18, 2026

Raychem MVFT Fusion Tape: Ratings, Rolls and How Much to Use

Raychem Medium Voltage Fusion Tape (MVFT) is a self-amalgamating silicone tape for insulating busbar that cannot be taken apart. The overlapped layers fuse into one seal. It sticks to itself and to other insulating materials, but not to metal or porcelain, so it comes off for maintenance. TE lists it for overhead power networks, electrical substations and data center power systems, indoors and outdoors.

What does one layer or two layers of MVFT protect against?

TE rates MVFT by AC dry withstand for one minute. A single layer applied with a two-thirds overlap gives flashover protection to at least 15 kV, and a second layer raises it to 35 kV.

BuildAC dry withstand, 1 min
One layer, two-thirds overlapAt least 15 kV
Two layers35 kV

TE also lists continuous operation up to 90 °C, non-tracking properties, compatibility with the TE Raychem medium voltage insulation enhancement system, and EU RoHS and ELV compliance.

Which MVFT roll do I order?

All four rolls are 50 mm (2 in) wide. The grey roll is the standard retrofit size, and the red rolls come in shorter lengths. TE's datasheet (EPP-2644, October 2024) lists three rolls. TE's customer drawing E00000857 (revision B1, August 2025) also lists MVFT-2-7(B4), which has the same length, width and color as MVFT-50-6400 but is packed 4 rolls.

Catalog numberTE part numberLength, m (yd)Width, mm (in)ColorStandard pack
MVFT-G-2-12(B4)CN5708-00011 (12)50 (2)Grey4 rolls
MVFT-2-7(B4)EK8870-0006.4 (7)50 (2)Red4 rolls
MVFT-50-6400CN4338-0006.4 (7)50 (2)Red1 roll
MVFT-50-1800CN4339-0001.8 (2)50 (2)Red1 roll

TE lists a shelf life of 2 years from date of manufacture.

How much MVFT do I need per metre of busbar?

TE gives the estimated length of tape needed to insulate 1 m (3 ft) of busbar, by bus shape and size.

Busbar shapeSize, mm (in)Tape per 1 m (3 ft) of bus, m (ft)
Rectangular25 x 10 (1 x 0.3)4.7 (15)
Rectangular50 x 10 (2 x 0.3)7.6 (25)
Rectangular75 x 10 (3 x 0.3)11.4 (38)
Rectangular100 x 10 (4 x 0.3)15.6 (51)
Rectangular150 x 10 (6 x 0.3)25 (82)
Rectangular200 x 10 (8 x 0.3)30 (98)
Square25 x 25 (1 x 1)6 (20)
Square50 x 50 (2 x 2)12 (39)
Square75 x 75 (3 x 3)18 (59)
Square100 x 100 (4 x 4)24 (79)
Square150 x 150 (6 x 6)36 (118)
Round12 (0.5)2.5 (8)
Round25 (1)5 (16)
Round50 (2)10 (33)
Round75 (3)15 (49)
Round100 (4)20 (66)

Example, our math and not TE's: an 11 m grey roll at 7.6 m of tape per metre of bus covers about 1.4 m (4.7 ft) of 50 x 10 mm rectangular busbar. TE's catalog gives the same figure.

What do the MVFT test results say?

These are the material and performance figures from TE's MVFT datasheet.

TestMethodResult
Tensile strength after aging 168 h at 150 °CASTM D412Over 1,000 psi (6.8 MPa)
Ultimate elongation after aging 168 h at 150 °CASTM D412Over 450%
Low temperature flexibility, 4 h at -40 °CASTM D2671No cracking
Dielectric strength, 0.76 mm (0.03 in) wallASTM D149Over 160 kV/cm (400 V/mil)
Tracking and erosionASTM D2303No tracking, erosion or flame through 1 h at 2.5 kV, 1 h at 2.75 kV, 1 h at 3.0 kV and 20 min at 3.25 kV
Load cycling, 30 days at 130 °CTE testNo deformation or splitting
Low temperature install at 0 °CTE testInstallable without difficulty

Which TE documents go with MVFT?

Ask us if you need a copy of any of these.

DocumentWhat it is
EPP-2644Raychem Medium Voltage Fusion Tapes MVFT datasheet (October 2024)
E00000857MVFT customer drawing with roll sizes, TE part numbers and shelf life (revision B1, August 2025)
EPP-3150Installation instructions for Medium Voltage Fusion Tapes MVFT
EDR-5465MVFT Product Test Report
EDR-5651MVFT Material Test Report

Frequently asked questions

Does MVFT stick to the busbar?

No. TE says it sticks to itself and to other insulating materials, but not to metal or porcelain, so it can be removed for maintenance.

What voltage does MVFT protect to?

At least 15 kV AC dry withstand with one layer at two-thirds overlap, and 35 kV with two layers.

Can I use MVFT outdoors?

Yes. TE lists it for indoor and outdoor use.

Can I use MVFT where the equipment cannot be taken apart?

Yes. That is its main use. It wraps onto existing busbar, including complex connections.

Which MVFT roll is grey?

MVFT-G-2-12(B4), 11 m (12 yd) by 50 mm (2 in), packed 4 rolls.

Which MVFT rolls are red?

MVFT-2-7(B4) and MVFT-50-6400 are both 6.4 m (7 yd) by 50 mm (2 in), packed 4 rolls and 1 roll. MVFT-50-1800 is 1.8 m (2 yd) by 50 mm (2 in), packed 1 roll.

What is the shelf life of MVFT?

TE lists 2 years from date of manufacture.

How much tape does a busbar need?

It depends on shape and size. TE estimates 7.6 m (25 ft) of tape for each 1 m (3 ft) of 50 x 10 mm rectangular busbar. The table above covers rectangular, square and round bus.

What is the continuous operating temperature?

Up to 90 °C.

Where can I buy Raychem MVFT in New England or New York?

Utility Power Supply Company (UPSC) and Powertech Associates supply TE Raychem products across New England and New York State. The MVFT-G-2-12(B4), MVFT-50-6400 and MVFT-50-1800 are in our online store, and the two red rolls are request-a-quote items. For MVFT-2-7(B4) or anything else, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

For other busbar insulation options, see BBIT vs BPTM busbar insulation tubing and the TE Raychem product guide.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.