Ripley Clamps, Pliers and Torque Tools: QC-2, SCS-C, MBTT-150

November 12, 2026

Ripley Clamps, Pliers and Torque Tools: QC-2, SCS-C, MBTT-150

Strippers and slitters do the main cutting, but crews also need something to hold the cable steady, pliers to pull stripable semi-con and a torque tool where the spec calls for one. This guide covers those accessories from Ripley. The 600 A and load break torque tools are in the separable connectors guide, and matched sets are in the cable prep kits guide.

Which Ripley accessory do I need?

Start with the job.

JobToolNotes
Hold cable as a stop while strippingQC-2Heavy-duty aluminum, 0.5 to 2.5 in cable
Same job overhead on a hot stickUA01-7093Hot-stickable QC-2
Hold cable for a square semi-con scoring cutSCS-CLight-duty, 0.31 to 2 in cable
Pull stripable semi-conRFNP-L, RFNP-SESD-safe flat nose pliers, long or short nose
Torque a "K" base meterMBTT-150150 in-lb, 1 kV composite shaft
Turn a cable end stripper or penciling toolSW2Ratchet wrench, 600 V to 46 kV

What are the Ripley cable clamps?

All three are aluminum. Specs are as Ripley lists them.

SpecQC-2Stickable QC-2SCS-C
Part number43970UA01-709343965
TypeHeavy-duty quick clampHot-stickable quick clampLight-duty clamp
Cable O.D.0.5 to 2.5 in (12.7 to 63.5 mm)0.5 to 2.5 in (12.7 to 63.5 mm)0.31 to 2 in (8 to 51 mm)
MaterialAluminumAluminumAluminum
Length7.75 in (197 mm)7.75 in (197 mm)4.5 in (114 mm)
Weight1.5 lb (680 g)1.5 lb (680 g)2.72 oz (77 g)
UseStop for stripping operationsStop for overhead stripping, handle works with grip-all and shotgun hot sticksCompatible with SCS, BP 1A and BP 2A scoring tools to help ensure a square cut

What are the RFNP flat nose pliers?

The RFNP comes in a long nose and a short nose version. Ripley's product selector lists the RFNP pliers as a stripable semi-con removal tool, alongside the SCS and BP scoring tools. That covers JCN, copper tape shield, LC shield and flat strap cable at 5 to 35 kV underground, and subtransmission cable at 46 to 69 kV.

SpecRFNP-LRFNP-S
Part number4647446475
NoseLongShort
MaterialSteel alloySteel alloy
Length5.7 in (145 mm)5.1 in (130 mm)
Weight3.1 oz (89 g)2.2 oz (61 g)

Ripley describes both as ESD-safe, with smooth wide jaws, drop-forged hardened and tempered steel, and slip-free dual-compound handles. Surface resistance is 10^6 to 10^9 ohms/sq per IEC 61340-5-1.

What are the MBTT-150 and SW2 torque tools?

Specs are as Ripley lists them. Ripley does not list a torque, drive size or stated use for the SW2, so those rows say so.

SpecMBTT-150SW2
Part number36390R10500
UseMeter installation, Landis+Gyr "K" Base 3 Phase or similarRatchet wrench, listed as compatible with WS 5, WS 6, and WS 7 and 8 tools
Torque150 in-lb (±15 in-lb)Not listed
Voltage1 kV max600 V to 46 kV
Drive1/2 in square, takes a magnetic socket; 3/8 in square test pointNot listed
Length13.75 in (349 mm)10 x 3 x 0.75 in (254 x 76 x 19 mm)
Weight19 oz (539 g)11.2 oz (318 g)

On the MBTT-150, Ripley says the composite shaft insulates the user from the meter base, and the T handle is adjustable. Do not use it to remove un-torqued terminals, because the shaft can be damaged.

How do I pick the right one?

Work through these checks before you order.

StepWhat to check
Overhead or groundUA01-7093 on a hot stick, QC-2 from the ground
Cable sizeQC-2 for 0.5 to 2.5 in, SCS-C for 0.31 to 2 in
Scoring toolSCS-C is the match for SCS, BP 1A and BP 2A tools
PliersRFNP-L for reach, RFNP-S for the shorter nose, to pull stripable semi-con
Meter workMBTT-150, and confirm the meter base is a "K" base

Where can I buy Ripley accessories in New England or New York?

Powertech Associates and Utility Power Supply Company represent Ripley across New England and New York State. These are in our online store: QC-2, SCS-C, RFNP, MBTT-150, SW2 and UA01-7093. For other part numbers or availability, contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772.

Last updated: November 2026.

Interested in this product?

Contact us, request a quote, or order online.