Youngstown makes a lot of work gloves, and only some are flame resistant. This guide lists the Youngstown gloves that carry an arc rating and the specs Youngstown publishes for each. Arc ratings are per ASTM F2675, and cut levels are ANSI/ISEA.
| Glove | Item | Arc Rating | Cut Level | Waterproof | Youngstown's Stated Use |
|---|---|---|---|---|---|
| FR 4000 | 12-4000-60 | 8.6 cal/cm² | A7 | Not listed | Applications that need high dexterity |
| FR Mechanics Hybrid | 12-3270-80 | 15 cal/cm² | A4 palm, A2 top | Not listed | A broad range of work environments |
| FR Emergency Gas Glove | 12-3390-60 | 28 cal/cm² | A3 | Not listed | Emergency gas operations |
| FR Ground Glove | 12-3365-60 | 37 cal/cm² | A4 | Not listed | A wide range of working applications and environments |
| FR Waterproof Ultimate | 12-3290-60 | 55 cal/cm² | A4 | Yes | Harsh winter conditions |
| FR Waterproof Ground Glove | 12-3465-60 | 72 cal/cm² | A4 | Yes | Warm, dry and protected hands in harsh winter conditions |
Specs are from Youngstown's 2023 catalog. Check the product page for sizes and the cut sheet.
The Cut Resistant Titan XT (09-0983-10) is lined with 100% Kevlar and has a 5.0 mm EVA foam palm, TPR top-of-hand protection and a high-viz safety lime stretch nylon back. It is rated ANSI/ISEA A5 cut and Level 4 puncture. The General Utility Plus (03-3060-80) has a synthetic suede base layer, a non-slip reinforced palm, fingers and saddle, a terry cloth thumb and a neoprene cuff with adjustable closure. Youngstown describes it as all purpose and abrasion resistant. Neither lists an FR or arc rating.
A seamless glove with a palm coated in a nitrile-based coating and APG biopolymer FR coating, over a quad-helix composite yarn of glass fiber, para-aramid and modacrylic. Flame resistant per ASTM D6413, arc rated 8.6 cal/cm², cut level ANSI/ISEA A7. Youngstown describes the coating as improving grip in wet and dry conditions.
A goat grain palm with an FR Nomex top of hand and 100% Kevlar in the palm. Slip-fit cuff. Flame resistant per ASTM D6413, arc rated 15 cal/cm², cut level A4 on the palm and A2 on the top of hand. It will not drip or melt.
An FR Nomex IIIa outer shell, FR palm, FR Nomex thermal layer and a 100% Kevlar liner, with a 7 in x 8 in gauntlet cuff. Flame resistant per ASTM D6413 and EN 407.1 (Level 4), arc rated 28 cal/cm², cut level A3. Youngstown lists it as high visibility and anti-static.
18 oz/yd² goat grain leather, double layered at the palm, saddle, knuckles and fingertips, lined throughout with 100% Kevlar. Flame resistant per ASTM D6413, arc rated 37 cal/cm², cut level A4.
The FR Waterproof Ultimate has a flame and oil resistant cow grain leather shell, a waterproof and windproof membrane, 200g FR Nomex insulation and a 100% Kevlar liner. It is arc rated 55 cal/cm² with cut level A4.
The FR Waterproof Ground Glove has an 18 oz/yd² goat grain leather shell, a waterproof and windproof membrane, 160g FR Nomex insulation and a 100% Kevlar liner, with a Kevlar knit wristlet that fits under jacket sleeves. It is rated to ASTM F2302 and D6413, arc rated 72 cal/cm² with cut level A4.
See Warm, Dry, and Arc Rated for the full winter lineup.
Youngstown states that its arc rated gloves and leather protectors do not protect against shock or voltage. See how to choose the right protector for the leather protectors that go over rubber insulating gloves.
The FR 4000, FR Mechanics Hybrid, FR Emergency Gas Glove, FR Ground Glove, FR Waterproof Ground Glove and FR Waterproof Ultimate. The Titan XT and General Utility Plus do not list an FR rating.
It is the ASTM F2675 value in cal/cm² that Youngstown publishes for each glove.
No. Youngstown states that its arc rated gloves and leather protectors do not protect against shock or voltage.
The FR Waterproof Ultimate and FR Waterproof Ground Glove, both with a waterproof and windproof membrane.
The FR Emergency Gas Glove, which Youngstown designed specifically for emergency gas operations.
Of the FR gloves listed here, the FR 4000 at ANSI/ISEA A7.
Powertech Associates supplies Youngstown gloves to electric utilities, line contractors and municipal crews. Shop all Youngstown gloves online, or go straight to a glove:
To confirm sizes and options, contact Powertech Associates.
Last updated: November 2026.
