
Solar crews use a handful of products again and again across a build: connectors at the panel, strippers for feeder wire, sealants at pads and conduit, cleaners and lubricants for cable work, test gear for the array, and a panel cleaner for upkeep. This guide sorts what we carry by the job, with links to the detailed guide where there is one. Everything is in the Solar section of our online store.
Find the job on the left, then open the guide or section on the right.
| Solar job | Product | Maker | Where to read more |
|---|---|---|---|
| Connect PV cable to panels | SOLARLOK 2.0 plug and splice connectors | TE Connectivity | TE SOLARLOK section below |
| Strip 2kV aluminum PV wire | PV wire stripping kits and US08 bushings | Ripley | Ripley PV wire stripping kits |
| Strip secondary and 600V cable | VariStrip end strip kits, US21-7300 triplex stripper | Ripley | Ripley cable strippers |
| Seal pads and inverter bases | InstaGrout PMT-1, PMT-2, PMT-3, PMT-10 | Polywater | Polywater products for solar contractors |
| Seal conduit, boxes and pedestals | AFT and FST foams, PedFloor foams | Polywater | AFT vs FST |
| Clean cable before splicing | Type HP cleaner degreaser | Polywater | Polywater products for solar contractors |
| Pull cable through conduit | LZ universal cable pulling lubricant | Polywater | Polywater products for solar contractors |
| Test the array | IMT100 multi-tester, PVK350 photovoltaic test kit | Megger | Megger section below |
| Clean panels | SPW solar panel cleaner | Polywater | Polywater SPW panel cleaner |
SOLARLOK 2.0 connectors and splices are TE's insulation displacement DC connectors for 1500 VDC PV installations. Specs below are from TE's SOLARLOK 2.0 brochure and the te.com product pages.
| Item | TE specification |
|---|---|
| Termination | Insulation displacement contact. No wire stripping or contact crimping: plug the cable in and press the button to terminate. |
| Wire range | One connector covers 2.5 to 6 mm² (14 to 10 AWG) |
| Voltage | 1500 VDC, IEC and UL certified |
| Standards | IEC 62852 and UL 6703 |
| Water protection | IP68 (1 m for 24 hours), with a gel filling |
| Housing | PPE and PS, built to withstand high UV exposure |
| Design | Single piece pin and socket connectors, no loose parts |
| Compatibility | Standard solar interface, compatible with TE PV4-S connectors and SOLARLOK DC connector protection caps |
| Applications | Harnesses, jumpers and solar applications |
| Part number | What it is |
|---|---|
| 2347245-1 | SOLARLOK 2.0 kit, pin and socket connector, #14 to 10 AWG |
| 2315176-1 | SOLARLOK 2.0 pin connector |
| 2336077-1 | SOLARLOK 2.0 splice |
| 2341979-1 | SOLARLOK 2.0 hand tool |
| 2342988-1 | SOLARLOK 2.0 delatch gauge tool |
TE's brochure also lists a socket connector (2308033-1), a die set (2512267-1) and male and female protection caps (2396108-1 and 2396109-1). Contact Powertech Associates for SOLARLOK 2.0 parts that are not listed in the store.
Ripley's PV wire stripping kits are drill-operated kits for 2kV aluminum PV wire. Each has a WS 22 SNAP power-driven end stripper, a drill adapter, custom bushings and a case, and the four kits differ only in the bushings included.
| Product | What it is |
|---|---|
| UA01-7010, UA01-7086, UA01-7087, UA01-7088 | PV wire stripping kits, compared by bushing sizes in the Ripley PV kit guide |
| US08 PV wire bushings | Square-cut bushings for 2kV aluminum PV wire, sold one per conductor size, #8 AWG through 1000 kcmil |
| VariStrip end strip kits and US21-7300 | Adjustable tools for THHN, XHHW and 600V triplex cable, see the VariStrip guide |
Polywater makes the sealants, cleaners and lubricant that show up on most solar sites. Details are in our Polywater solar guides.
| Product | What it does |
|---|---|
| InstaGrout PMT-1, 2, 3 and 10 | Pour-in urethane foam that seals openings around conduit at pads and inverter bases against rodents, snakes, insects and water |
| AFT and FST foams | Foams that seal around cable in conduit. AFT is a closed-cell foam in a spray can, rated to hold 10 ft of water head. FST is a two-part foam in a caulking tube, rated to hold 22 ft. |
| PedFloor foams (PF-3, PFP-5) | Pedestal sealant foams |
| Type HP | Cleaner degreaser for cable prep and electrical equipment that evaporates completely and leaves no residue |
| LZ lubricant | Pulling lubricant suitable on all cable jackets |
| SPW | Concentrated, water-based solar panel cleaner. Polywater recommends starting at 1 part cleaner to 25 parts water. |
AFT, FST, Type HP, LZ and SPW each come in several sizes, so find your size in the Solar section.
We carry two Megger products for PV testing. Specs below are from the Megger IMT100 and PVK350 datasheets. See also Megger's IMT100 and IMT100X product page and PVK350 photovoltaic test kit page.
| Product | What it is |
|---|---|
| IMT100 industrial multi-tester (1015-518) | Handheld multi-tester with insulation resistance, 4-wire low resistance, continuity, voltage, capacitance and inductance tests, for PV, EV and industrial work. The IMT100X (1017-031) adds Bluetooth. |
| PVK350 photovoltaic kit (1014-805) | Add-on kit for PV installation, commissioning and testing, with a solar clamp meter, irradiance meter and PV test leads in one hard carry case |
| Item | Megger specification |
|---|---|
| Insulation resistance range | 100 Ω up to 200 GΩ |
| Insulation test voltages | 50, 100, 250, 500 and 1000 V, plus a variable setting from 10 V up to 999 V |
| Insulation tests | PI, DAR and timed tests, with temperature compensation |
| Guard terminal | Returns leakage current to prevent insulation measurement errors from surface contamination |
| Continuity | 0.01 Ω to 1 MΩ, 200 mA test current, selectable 20 mA or 200 mA limit |
| Low resistance (4-wire Kelvin) | 1 mΩ to 10 Ω at 200 mA DC, accuracy ±0.25% of reading ±10 digits |
| DC voltage | 0 to 1000 V, with polarity test |
| AC voltage | 10 mV to 1000 V TRMS, with phase rotation and frequency |
| Capacitance | 0.1 nF to 1 mF |
| Temperature | Thermocouple input for temperature measurement and insulation compensation |
| PV testing | Meets IEC 62446 for PV testing. Supplied with PV connector adaptors (MC4-type and MC3-type) for the test leads. |
| Safety | CAT III 600 V up to 3000 m, IP54 |
| Memory | 256 test results, downloaded by USB |
| IMT100X | Adds Bluetooth live streaming to CertSuite Asset |
Megger says the PVK350 provides the additional instruments needed alongside the usual electrician's test equipment.
| Item | Part number |
|---|---|
| DCM1500S AC/DC solar clamp meter | 1013-357 |
| PVM210 irradiance meter | 1002-548 |
| PVHV1 test leads (4 mm plugs) | 1013-362 |
| PVHV2 test leads (PV plugs) | 1013-363 |
| PV test leads, 2 sets | 1002-549 |
| DCM 4 mm lead set, including probes and clips | 1013-358 |
| TP100 K-type thermocouple probe | 1013-364 |
| MC3 type to MC4 adaptor set | 2002-881 |
| Batteries and hard carry case | Included |
| Item | Megger specification |
|---|---|
| DCM1500S, PV DC voltage | Up to 2000 V with the PVHV1 or PVHV2 leads |
| DCM1500S, PV AC voltage | Up to 1500 V with the PVHV1 or PVHV2 leads |
| DCM1500S, DC and AC voltage direct | 1000 V |
| DCM1500S, AC and DC current | 1500 A |
| DCM1500S, other readings | Resistance, diode, capacitance, temperature and frequency |
| DCM1500S, safety rating | IEC 61010-1 and IEC/EN 61010-2-033, CAT IV 600 V and CAT III 1000 V |
| DCM1500S, Bluetooth | Works with the Megger Link App for live trending and logging |
| PVM210, range | 1999 W/m², shown in W/m² or BTU |
| PVM210, accuracy | Typically within ±10 W/m² |
| PVM210, use | Single-handed, for work at height and on sloping roofs |
| PVHV1 and PVHV2 leads | 2000 V DC and 1500 V AC, for circuits not directly connected to mains |
| Question | Answer |
|---|---|
| What connects PV cable to a panel without stripping? | TE SOLARLOK 2.0 connectors use insulation displacement, so you plug the cable in and press the button. |
| What wire sizes do SOLARLOK 2.0 connectors take? | 2.5 to 6 mm² (14 to 10 AWG) in one connector. |
| What strips 2kV aluminum PV wire? | Ripley PV wire stripping kits, which use a WS 22 SNAP stripper and US08 bushings. |
| What seals the bottom of an inverter or pad? | Polywater InstaGrout. |
| How do I clean solar panels? | Polywater SPW, diluted as Polywater directs. See the SPW guide. |
| What tests insulation on a PV array? | Megger's IMT100 tests insulation resistance at up to 1000 V, from 100 Ω up to 200 GΩ. |
| What is the difference between the IMT100 and IMT100X? | The IMT100X adds Bluetooth to stream results to CertSuite Asset. The IMT100 stores 256 test results for USB download. |
| What is in the Megger PVK350 kit? | A DCM1500S solar clamp meter, a PVM210 irradiance meter, PV test leads, a thermocouple probe and a hard carry case. |
| How high a PV DC voltage can the PVK350 measure? | The DCM1500S reads up to 2000 V DC with the PVHV1 or PVHV2 leads, which are for circuits not directly connected to mains. |
Shop the Solar section of our online store, or contact Powertech Associates for help matching products to your job at info@powertech-upsc.com or (860) 678-8772.
Source: TE SOLARLOK 2.0 brochure (EPP-3682-DDS-08/25) and te.com; Megger IMT100 datasheet (IMT100--IMT100X_DS_en_V06) and PVK350 datasheet (PVK350_DS_en_V04); Ripley and Polywater guides on this site.
Last updated: November 2026.