
Richards Manufacturing makes a wide range of products for underground distribution and utility connections. This page sorts our Richards guides by what you are trying to do, so you can get to the right size tables and part number help quickly.
Pick the job on the left and open the guide on the right.
| If you need to | Start with |
|---|---|
| Choose a 600/900 A deadbreak elbow | Richards Deadbreak Elbows: 62LCT1, 62LCT2 and 63LCT2 Explained |
| Decide between deadbreak and loadbreak | Richards Deadbreak vs Loadbreak Elbows: Choosing 600/900 A or 200 A |
| Size a deadbreak cable adapter | Richards Cable Adapter Sizing: How to Choose P625CA and P635CA Sizes |
| Splice medium voltage cable | Richards SSC Series Cold Shrink Splice: Sizing, Part Numbers and How to Choose |
| Pick a lug | Richards Copper Lugs or Richards Aluminum Compression Lugs |
| Order deadbreak plugs, caps and bushings | Richards Deadbreak Accessories: Plugs, Caps, Bushings and Grounding |
Elbows, adapters, accessories and the housings that go with 600/900 A deadbreak systems.
| Product | What it is | Guide |
|---|---|---|
| 62LCT1, 62LCT2 and 63LCT2 | How to choose a 600/900 A deadbreak elbow, read the part number and see what else you need to order | Deadbreak elbows |
| Deadbreak vs loadbreak | Choosing between 600/900 A deadbreak elbows and the 15 kV 200 A loadbreak elbow, with ratings, cable adapter sizes, lugs and accessories | Deadbreak vs loadbreak |
| P625CA and P635CA | Cable adapter letters E through R by cable insulation diameter, with sizing tables for 15/25 kV and 35 kV | Cable adapter sizing |
| Deadbreak accessories | Insulating plugs, connecting plugs, caps, parking and grounding bushings and bushing extenders | Accessories guide |
| R-Stack and junctions | R-Stack for 600/900 A deadbreak, the 63RSA R-Stack arrester, the P625DE elbow extension adapter and deadbreak junctions | R-Stack guide |
| CSH Series | Cold Shrink Hammerhead with a range-taking cable entrance, EPDM jacket and integral jacket seal in one 600/900 A deadbreak housing | CSH Series |
Splices and joints for medium voltage cable.
| Product | What it is | Guide |
|---|---|---|
| SSC Series | Cold shrink and push-on hybrid splice for medium voltage cable through 35 kV, with sizing and part number help | SSC splice |
| JSCS Series | Cold shrink sleeve that combines insulation, shielding and jacket sealing for medium voltage disconnectable joints through 35 kV | JSCS Series |
Compression lugs, parallel clamps and vise connectors.
| Product | What it is | Guide |
|---|---|---|
| Copper lugs | CL, SCL, CL-4N, HDCL, TCL, peephole, mechanical and more | Copper lugs |
| CL-2N | Straight two-hole copper NEMA lugs from #6 to 2000 MCM, with bolt sizes and installing dies | CL-2N lugs |
| Aluminum lugs | AL, SAL, AL-N, ALCD, TAL, APT and AL-4N, with wire sizes, bolt sizes and installing dies | Aluminum lugs |
| APC | Aluminum parallel clamps with conductor ranges, figure numbers, covers and options | APC clamps |
| VC Series | Silicon bronze vise connectors VC3 to VC18, with the -P, -SH and -W options | VC connectors |
Tools for pulling, tensioning and getting into vaults.
| Product | What it is | Guide |
|---|---|---|
| WARN-Richards Lineman Drill Winch | Runs off a battery drill and tensions wire and cable with up to 1,500 lb of pull | Drill winch |
| RLH lifting hooks | Hot-forged steel hooks for vault entrance covers, in 24, 28, 32 and 36 inch lengths | Manhole lifting hooks |
Quick answers about using these guides.
| Question | Answer |
|---|---|
| Where do I start if I am not sure which product I need? | Use the "Start here" table above. For elbows and accessories, begin with the deadbreak elbows guide. |
| Do the guides list every size? | They follow Richards catalog data for each product. Confirm sizes and part numbers against Richards' current documentation for the exact product. |
| How do I get help matching a part number? | Contact Powertech Associates with the cable size, voltage and application, and we will help you find the right Richards part. |
Order Richards products from our store, or contact us for sizes and part numbers that are not listed.
| Option | How |
|---|---|
| Online | Search Richards on the store |
| Help choosing a product | Contact Powertech Associates at info@powertech-upsc.com or (860) 678-8772 |
Last updated: November 2026.